Skip to main content

All Questions

Filter by
Sorted by
Tagged with
1 vote
0 answers
37 views

Sum of all integer binary solutions of a TUM linear system

I have the following problem: $A x = b$ where $A$ is a $m \times n$ total unimodular matrix (TUM) with entries in $\{0,1\}$ and $b$ is a $m$-vector of strictly positive integers. Let $\mathcal X$ be ...
0 votes
1 answer
428 views

The dimension of the normal cone of a face in a polytope

Let $P$ is a polytope in $\mathbb{R}^n$ if $F$ is one of its faces of dimension $d$ then the dimension of its normal cone $\mathcal{N}(F)$ is $n-d$.\ This seems to be intuitively obvious but I can't ...
5 votes
2 answers
316 views

Dimension of configuration space of triangulated convex polyhedron

The configuration space of all tetrahedra is $5$-dimensional, perhaps a non-obvious fact. There are $12$ face angles, but the sum of each of the four faces angles is $\pi$, reducing $12$ to $8$ ...
4 votes
1 answer
866 views

When is a triangular matrix totally unimodular?

I have a {0,1}, invertible, triangular matrix, that I would like to show is totally unimodular. Are there any known results on the total unimodularity of classes of triangular matrices?
2 votes
2 answers
418 views

Lovasz theta function - uses

Lovasz theta function bounds the Shannon capacity of graphs. What are some other uses of the function - especially in asymptotic coding theory and optimization problems?
16 votes
3 answers
1k views

Can a convex polytope with $f$ facets have more than $f$ facets when projected into $\mathbb{R}^2$?

Let $P$ be a convex polytope in $\mathbb{R}^d$ with $n$ vertices and $f$ facets. Let $\text{Proj}(P)$ denote the projection of $P$ into $\mathbb{R}^2$. Can $\text{Proj}(P)$ have more than $f$ facets? ...
2 votes
0 answers
94 views

Dodecahedron deformation II

(Follow-up to this question) Can a dodecahedron be deformed into a great stellated dodecahedron while maintaining the number of dimensions each element occupies?
6 votes
1 answer
264 views

Can a dodecahedron be deformed into a great stellated dodecahedron?

Can a convex regular dodecahedron be deformed into a great stellated dodecahedron while keeping all pentagons planar and all edges of nonzero length the whole time?
2 votes
0 answers
76 views

Polyhedron coordinate bound

Given a polyhedron $$Ax\leq b$$ where we assume $A\in\mathbb Q^{m\times n}$ and $b\in\mathbb Q^{m}$ and it takes $L$ bits to represent the inequalities what is a good bound on the quantity $\|y\|_\...
3 votes
1 answer
351 views

Request for an article by Jim Lawrence

Jim Lawrence has a very important paper on the topic of valuations on polyhedra called "Rational-function-valued valuations on polyhedra", published in the DIMACS volume Discrete and ...
0 votes
0 answers
165 views

Minimum circumscribed ellipsoid of $\mathcal H$-polytope

Given matrix $A \in \mathbb{R}^{m \times n}$ and vector $b \in \mathbb{R}^n$, consider the $\mathcal H$-polytope $P$ defined as follows $$ P := \left\{ x \in \mathbb{R}^n : Ax \leq b \right\} $$ I ...
0 votes
0 answers
137 views

Any technique for linearization, or linear approximation?

Consider the following Matrix constraint: $$ \begin{bmatrix} -U+\psi\Sigma_b^{-1} & V \\ V^T & -V^TU^{-1}V+\tau_2 -\psi \end{bmatrix} \leq 0 $$ where $\Sigma_b$ is a known positive definite ...
28 votes
5 answers
2k views

Visibility of vertices in polyhedra

Suppose $P$ is a closed polyhedron in space (i.e. a union of polygons which is homeomorphic to $S^2$) and $X$ is an interior point of $P$. Is it true that $X$ can see at least one vertex of $P$? More ...
0 votes
1 answer
131 views

How hard is a linear programming with a bounded constraint?

Background: I am reading Greg Kuperberg's answer to the question Deciding membership in a convex hull. I am thinking about the complexity of ''Deciding membership in a convex hull''. Restate the ...
3 votes
0 answers
282 views

Continuum of Lagrange multipliers, duality gap, and minimax theorem

Suppose I have a linear optimization problem involving random variables on some (infinite) probability space $\Omega$. For example, need to maximize expectation $E[Q]$ of random variable $Q$ subject ...
24 votes
1 answer
1k views

Which unfoldings of the $d$-dimensional hypercube tile $(d{-}1)$-space?

A six year old question, Which unfoldings of the hypercube tile $3$-space?, has just been answered by Moritz Firsching: All $261$ unfoldings tile space! So now we know: For $d=2$, the unfolding of ...
5 votes
1 answer
246 views

Convex polyhedra with non-congruent faces

Question: Are there convex polyhedra wherein all faces are convex polygons with same area and perimeter and no two faces are mutually congruent? Remarks: If the answer to above is "no", then,...
0 votes
1 answer
214 views

How do you call a linear programming problem when the solution should be "constrained" to a norm?

(apologies for the n00b question) Let's say we have a vector of length $n$, with to-be-determined values: $a_1, a_2, ...,a_n$. And we have information that partial sums of these elements are equal to ...
27 votes
3 answers
13k views

Which unfoldings of the hypercube tile 3-space: How to check for isometric space-fillers?

Recently Mark McClure constructed and displayed the 261 unfoldings of the hypercube (tesseract) in response to the question, "3D models of the unfoldings of the hypercube?": The first 9 unfoldings ...
1 vote
0 answers
139 views

Regularity of Laplace equation on non-convex polyhedral domain

This might be a known problem, but I could not find a precise answer. I have the following Laplace equation \begin{equation} \begin{cases} -\Delta u = f & x \in \Omega;\\ \quad\: u = g & x \in ...
3 votes
0 answers
111 views

"Slim" directed polytopes: any established name for them?

This is a "looking for context" question. Let's say that a polytope is directed if its 1-skeleton is an oriented graph with no cycles, one source, one sink. (Edit: let us additionally assume ...
0 votes
1 answer
110 views

Detecting non-negativity of a single constraint by polyhedral constraints - $I$

We consider $$\langle a,x\rangle=b$$ (linear constraints) where $x\in\mathbb R_{\geq0}^n$ and every entry in $a=(a_1,\dots,a_n)$ is in $\mathbb Z_{\geq0}^{n}$ (non-negative) and the entry $b$ is in $\...
1 vote
0 answers
162 views

Optimization problem on trace of complex matrix product

Given a complex rectangular matrix $A$ $(k \times n)$, I am interested in solving the following optimization problem over $(k\times n)$ complex matrices $x$: $$ \mathrm{arg}\max_X \,\mathrm{trace}(X^...
1 vote
0 answers
63 views

Counting $\bmod 2$ number of vertices of sparsely represented polyhedra

Given a polyhedron $$Ax\geq b$$ is there an $NC^1$ or an $NC^2$ algorithm to count the number of vertices $\bmod2$? Assume $A\in\{0,1\}^{m\times n}$ and $b\in\mathbb Z^{m}$ ($m=O(n)$) and assume rows ...
1 vote
0 answers
43 views

Detecting non-negativity of a single constraint by polyhedral constraints - $II$

Let $$\langle a,x\rangle=b$$ be a linear constraint where $x\in\mathbb R^n$ and every entry in $a=(a_1,\dots,a_n)$ is in $\mathbb Z_{\geq0}^{n}$ (non-negative) and the entry $b$ is in $\mathbb Z_{\...
0 votes
1 answer
116 views

Iterations of Dantzig-Wolfe Decomposition for a Simple Linear Programming problem

This arises from an engineering problem I am working on. Let $\mathbf{c}_i,\mathbf{a}_i,\mathbf{b}_i\in \mathbb{R}^{d}$ be a given set (collection) of vectors where $i\in\{1,\dots,n\}$. Define the ...
0 votes
1 answer
168 views

Number of linear inequalities describing a polyhedron with prescribed number of vertices

If a polytope has $d$ vertices in $k$ dimensions how many linear inequalities is required to describe it?
20 votes
1 answer
890 views

Tetrahedra passing through a hole

Assume a plane $P\subset\mathbb R^3$ has a hole $H$, and that the hole is topologically a compact disc. Being so, $P\setminus H$ does not separate the space. A regular tetrahedron $\sigma^3$ (of edge-...
2 votes
3 answers
752 views

Reference Request for Integer factorization with LP/ILP

Have there been attempts to factor integers with Linear Programming? Searching the internet suggests that for Integer Factorization only Number Theoretic algorithms, like sieves, are taken into ...
1 vote
0 answers
122 views

Integrality of polyhedra

Given two polyhedra in $H$ representation $P_1:Ax\leq b$ and $P_2:Bx\leq c$ which are integral are bounded when is their intersection also integral? Given two polyhedra in $H$ representation $P_1:Ax\...
2 votes
1 answer
591 views

Intersection of a vector subspace with a cone

Given a set of vectors $S=\{v_1, v_2,...,v_d\} \subset \mathbb{R}^{N}, \, N>d$, is there any algorithm to decide if there exist a vector with all coordinates strictly positive in the generating ...
0 votes
0 answers
93 views

Number of vertices in a polyhedron

Consider polytopes $$A_1[x_{1,1},\dots,x_{1,m_1},z_{1}]'\leq b_1$$ $$A_2[x_{2,1},\dots,x_{2,m_2},z_{2}]'\leq b_2$$ $$B[z_{1},z_{2},z]'\leq c$$ having vertex count $v_1,v_2$ and $v$ respectively. We ...
1 vote
0 answers
172 views

continuity of linear programming

I have the following conjecture: Given a closed convex set $S \subseteq \mathbb{R}^n$ and one of its exposed face $F=\{x \in S \mid \pi x = \pi_0\}$, where $\pi x =\pi_0$ is the supporting hyperplane ...
1 vote
1 answer
170 views

Exactly counting number of vertices of a polyhedron

Suppose $Ax\leq b$ is a polyhedron, where the number of rows in $A$ is $r$, the vector $x$ lies in $\mathbb R^n$ and the rank of $A$ is $t$. Assume minimal number of hyperplane inequalities to define ...
2 votes
0 answers
138 views

Distinguishable knots (with constraints) over polyhedra

I'm trying to find the number of distinguishable knot projections over certain convex regular polyhedra according to the following constraints. On each face on the polyhedron the knot will have a ...
1 vote
1 answer
98 views

Optimality gap between a joint linear program and decoupled sub programs

Let $\mathbf{c}_i,\mathbf{s}_i$ be given entry-wise positive $n\times 1$ vectors for $i\in[1,\dots,d]$. Let $\tau, \alpha_1,\dots, \alpha_d$ be given positive constants. Consider the linear ...
7 votes
2 answers
350 views

Homotopy domination of a wedge of two polyhedra

The topological space $A$ is called homotopy dominated by the space $X$ if there are maps $f:A\longrightarrow X$ and $g:X\longrightarrow A$ so that $g\circ f\simeq id_A$. Question: Suppose that $...
1 vote
0 answers
81 views

Algorithm for deciding feasibility of linear programs [closed]

Suppose I have the simple linear program $$Ax \geq 0, \quad x \geq 0$$ We know that this system has a solution (for example, $x=0$). But, what if we made this rule for this system? $$Ax \geq 0, \quad ...
4 votes
1 answer
204 views

Reference: Packing under translation is in NP

I am looking for a reference for a result that I am aware of. Let me describe the result. Given a polygon $C$ and polygons $p_1,\ldots,p_n$, it can be decided in NP time, if $p_1,\ldots,p_n$ can be ...
5 votes
1 answer
323 views

Embedding an icosahedron

A transitive set in $\mathbf{R}^n$ is a finite set with a transitive group of symmetries. I want to understand how subsets of a transitive set constrain the group. Let me start with the example of a ...
1 vote
0 answers
920 views

Maximizing a piecewise-linear convex function

Crossposted on Operations Research SE. I am working on an optimization problem where some of the terms of the objective function to maximize are expressed as a piecewise linear function of variables: ...
4 votes
1 answer
174 views

Finding Motzkin's original paper on copositive quadratic forms

I am currently in the process of writing my thesis about copositive matrices and would like to write a chronological narrative about the ascent of these matrices to the prominent place they have today ...
26 votes
4 answers
914 views

Why do some uniform polyhedra have a "conjugate" partner?

While browsing through a list of uniform polynohedra, I noticed that the square of the circumradius $R_m$ of the small snub icosicosidodecahedron ($U_{32}$) with unit edge lengths is, $$R_{32}^2 =\...
1 vote
0 answers
74 views

Classification of pseudoregular polyhedra

In contrast to a regular polyhedron, which has one orbit of flags, I’ve been studying what I call pseudoregular polyhedra, which have two orbits of flags interchanged by conjugation (explained here). ...
1 vote
0 answers
322 views

Decomposition of Polyhedral - An example

There is no doubt that clear examples consolidate the understanding of concepts being learnt. I am new to finding the structure and decomposition of a polyhedra. Suppose that we have the system $$ \...
0 votes
1 answer
76 views

A question on graph partitioning

Given a connected un-directed simple graph $G=(V,E)$, is there a polynomial time algorithm to find the smallest subset $S$ of $V$ such that each node in $V \setminus S$ has at least 50% of its ...
4 votes
1 answer
94 views

Is the space of Euclidean polyhedra with a fixed $1$-skeleton connected?

Let $\mathcal{A}_\Gamma$ be the space of convex (non-degenerate) Euclidean polyhedra with $1$-skeleton a certain polyhedral graph $\Gamma$. This space can be seen as a subset of $\mathcal{Gr}_2(\...
48 votes
4 answers
3k views

How many ways can you inscribe five 24-cells in a 600-cell, hitting all its vertices?

You can inscribe five tetrahedra in a dodecahedron so that each vertex of the dodecahedron is the vertex of just one tetrahedron, as drawn here by Greg Egan: Warmup question: How many ways can you do ...
1 vote
1 answer
1k views

Check if a point is in the interior of the convex hull of some other points in high dimensions, and lower-bounding the largest enclosed ball [closed]

Given $m$ points $P=\{p_0, p_1, ..., p_m\}$ in high dimensions (e.g. 100), it is known that computing (or even representing) their convex hull $\text{conv}(P)$ is generally intractable due to the ...
3 votes
0 answers
87 views

Additional symmetries of the Traveling Salesman Polytope

Given the complete graph $K_n=(V,E)$, the Traveling Salesman Polytope is a convex polytope in $\Bbb R^E$ obtained as the convex hull of the indicator vectors of (edge-sets of) Hamiltonian cycles in $...

1 2 3
4
5
15