24
$\begingroup$

In Scott's classic textbook on Group Theory, he asks:

Suppose that $G$ is a finite group. Is the sequence of isomorphism types of the groups $Aut^{(n)}(G)$ for $n \in \mathbb{N}$ eventually periodic?

Here $Aut^{(2)}(G) = Aut(Aut(G))$ etc. Equivalently, is the sequence $|Aut^{(n)}(G)|$ always bounded above?

It apparently remains opens whether the sequence of automorphism types of $Aut^{(n)}(G)$ is in fact always eventually constant. (A wonderful theorem of Wielandt says that if $G$ is a finite centerless group, then the sequence is eventually constant.) So I would like to ask:

Does there exists a finite group such that $Aut(G) \not \cong G$ but $Aut^{(n)}(G) \cong G$ for some $n \geq 2$?

Edit: Joel has pointed out that my question is perhaps even open for infinite groups. This sounds like an interesting question which doesn't seem amenable to the standard tricks.

$\endgroup$
14
  • 3
    $\begingroup$ You might want to look at the answers to mathoverflow.net/questions/5635/does-autaut-autg-stabilize $\endgroup$ Commented Jun 11, 2010 at 20:10
  • $\begingroup$ @David: I hadn't noticed that this question had already been asked in mathoverflow.net/questions/5635/does-autaut-autg-stabilize. But it's a good question so it's worth asking again! $\endgroup$ Commented Jun 11, 2010 at 20:30
  • 1
    $\begingroup$ How are the answers for 5635 not adequate? $\endgroup$ Commented Jun 11, 2010 at 21:21
  • 11
    $\begingroup$ For everyone's information, some of the best answers to the other question amount to providing links to Simon Thomas' articles and book on the subject. $\endgroup$ Commented Jun 11, 2010 at 21:26
  • 1
    $\begingroup$ Mmmm ... maybe the infinite case is worth thinking about! $\endgroup$ Commented Jun 12, 2010 at 0:12

3 Answers 3

8
$\begingroup$

As a follow up to my previous answer, I have computed all the automorphism series for groups of order up to 24 within the limits of what I could do with GAP. I will share some of what I found, throughout I will use the notation $(n,d)$ for the group of order $n$ with GAP library id $d$. For large groups not contained in the library, I will use $<r,n>$ to denote a group with minimum generating set of size $r$ and of order $n$, if I know only a bound for $r$, I will use $<\leq r,n>$ to denote that fact. We will say that a group $G$ stabilizes (at $k$) if $Aut^{(k-1)}(G) \not\simeq Aut^{(k)}(G) \simeq Aut^{(k+1)}(G)$. We will call a group $G$ stable if $G \simeq Aut(G)$.

I have verified that all groups of order up to 24 stabilize except for the following groups:

$(16,5)$, $(16,6)$, $(16,7)$, $(16,8)$, $(16,9)$, $(16,10)$, $(16,11)$, $(24,4)$, $(24,6)$, $(24,7)$, $(24,9)$, and $(24,10)$.

Of note is that many of these groups have the same automorphism group, hence their series is identical from $k=1$ onwards. Specifically, $(16,5)$, $(16,6)$, $(16,8)$, $(24,9)$, and $(24,10)$ all have $(16,11)$ as their automorphism group. The groups $(16,7)$, $(16,9)$ have the same automorphism group and so do the groups $(24,4)$, $(24,6)$, and $(24,7)$.

The following is a list of the groups I know to be stable, it is complete only up to order 24, and I give a Structure Description of the ones of order up to 24:

$(1,1) \simeq \mathbb{Z}_1$, $(6,1) \simeq S_3$, $(8,3) \simeq D_8$, $(12,4) \simeq D_{12}$, $(20,3) \simeq \mathbb{Z}_5 \rtimes \mathbb{Z}_4$, $(24,12) \simeq S_4$.

These are still in the library: $(40,12)$, $(42,1)$, $(48,48)$, $(54,6)$, $(110,1)$, $(144,183)$, $(336,208)$, $(384,5678)$, $(432,734)$, $(1152,157849)$.

These are too big to be in the library: $<2,40320> \simeq S_8$, $<4,442368> \simeq Aut^{(6)}((16,3))$.

These results give me two (general) ideas on how to attack this problem: One, analyze those groups for which I haven't been able to determine stabilization to see if I can find anything they have in common and use it show the conjecture is false. Two, Analyze the stable groups to see what causes them to be stable and use that knowledge to (somehow) show that every group must eventually stabilize. Both will likely require a detailed analysis of how $Aut(G)$ arises from $G$, to see how $G$ controls the properties of $Aut(G)$.

Edit: I now have a complete list of stable groups of order up to 511, their GAP structure descriptions already reveal some very interesting patterns:

$(1,1)\simeq\mathbb{Z}_{1}$

$(6,1)\simeq S_{3}$

$(8,3)\simeq D_{8}$

$(12,4)\simeq D_{12}$

$(20,3)\simeq\mathbb{Z}_{5}\rtimes\mathbb{Z}_{4}$

$(24,12)\simeq S_{4}$

$(40,12)\simeq\mathbb{Z}_{2}\times(\mathbb{Z}_{5}\rtimes\mathbb{Z}_{4})$

$(42,1)\simeq(\mathbb{Z}_{7}\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2}$

$(48,48)\simeq\mathbb{Z}_{2}\times S_{4}$

$(54,6)\simeq(\mathbb{Z}_{9}\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2}$

$(84,7)\simeq\mathbb{Z}_{2}\times((\mathbb{Z}_{7}\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2})$

$(108,26)\simeq\mathbb{Z}_{2}\times((\mathbb{Z}_{9}\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2})$

$(110,1)\simeq(\mathbb{Z}_{11}\rtimes\mathbb{Z}_{5})\rtimes\mathbb{Z}_{2}$

$(120,34)\simeq S_{5}$

$(120,36)\simeq S_{3}\times(\mathbb{Z}_{5}\rtimes\mathbb{Z}_{4})$

$(144,182)\simeq((\mathbb{Z}_{3}\times\mathbb{Z}_{3})\rtimes\mathbb{Z}_{8})\rtimes\mathbb{Z}_{2}$

$(144,183)\simeq S_{3}\times S_{4}$

$(156,7)\simeq(\mathbb{Z}_{13}\rtimes\mathbb{Z}_{4})\rtimes\mathbb{Z}_{3}$

$(168,43)\simeq((\mathbb{Z}_{2}\times\mathbb{Z}_{2}\times\mathbb{Z}_{2})\rtimes\mathbb{Z}_{7})\rtimes\mathbb{Z}_{3}$

$(216,90)\simeq(((\mathbb{Z}_{2}\times\mathbb{Z}_{2})\rtimes\mathbb{Z}_{9})\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2}$

$(220,7)\simeq\mathbb{Z}_{2}\times((\mathbb{Z}_{11}\rtimes\mathbb{Z}_{5})\rtimes\mathbb{Z}_{2})$

$(240,189)\simeq\mathbb{Z}_{2}\times S_{5}$

$(252,26)\simeq S_{3}\times(\mathbb{Z}_{7}\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2}$

$(272,50)\simeq\mathbb{Z}_{17}\rtimes\mathbb{Z}_{16}$

$(312,45)\simeq\mathbb{Z}_{2}\times(\mathbb{Z}_{13}\rtimes\mathbb{Z}_{4})\rtimes\mathbb{Z}_{3}$

$(320,1635)\simeq((\mathbb{Z}_2\times\mathbb{Z}_2\times\mathbb{Z}_2\times\mathbb{Z}_2)\rtimes\mathbb{Z}_5)\rtimes\mathbb{Z}_4$

$(324,118)\simeq S_{3}\times(\mathbb{Z}_9\rtimes\mathbb{Z}_3)\rtimes\mathbb{Z}_2)$

$(336,208)\simeq PSL(3,2)\rtimes\mathbb{Z}_2$

$(342,7)\simeq (\mathbb{Z}_{19}\rtimes\mathbb{Z}_{9})\rtimes\mathbb{Z}_2$

$(384,5677)\simeq((((\mathbb{Z}_{4}\times\mathbb{Z}_{4})\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2})\rtimes\mathbb{Z}_{2})\rtimes\mathbb{Z}_{2}$

$(384,5678)\simeq((((\mathbb{Z}_{2}\times\mathbb{Z}_{2}\times\mathbb{Z}_{2}\times\mathbb{Z}_{2})\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2})\rtimes\mathbb{Z}_{2})\rtimes\mathbb{Z}_{2}$

$(432,520)\simeq(((\mathbb{Z}_{3}\times\mathbb{Z}_{3})\rtimes\mathbb{Z}_{3})\rtimes Q_{8})\rtimes\mathbb{Z}_{2}$

$(432,523)\simeq(((\mathbb{Z}_{6}\times\mathbb{Z}_{6})\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2})\rtimes\mathbb{Z}_{2}$

$(432,533)\simeq\mathbb{Z}_{2}\times((((\mathbb{Z}_{2}\times\mathbb{Z}_{2})\rtimes\mathbb{Z}_{9})\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2})$

$(432,734)\simeq(((\mathbb{Z}_{3}\times\mathbb{Z}_{3})\rtimes Q_{8})\rtimes\mathbb{Z}_{3})\rtimes\mathbb{Z}_{2}$

$(480,1189)\simeq(\mathbb{Z}_{5}\rtimes\mathbb{Z}_{4})\times S_{4}$

$(486,31)\simeq(\mathbb{Z}_{27}\rtimes\mathbb{Z}_{9})\rtimes\mathbb{Z}_{2}$

$(500,18)\simeq(\mathbb{Z}_{25}\rtimes\mathbb{Z}_{5})\rtimes\mathbb{Z}_{4}$

$(506,1)\simeq(\mathbb{Z}_{23}\rtimes\mathbb{Z}_{11})\rtimes\mathbb{Z}_{2}$

$\endgroup$
3
  • 1
    $\begingroup$ Update: I figured out how to get GAP to test all groups of order up to $n$ to see if they are stable or not, I have now have a complete list of stable groups of order up to 127 (took quite a bit of time for it test them all). The stable groups of order up to 127 have GAP ids: $(1,1)$, $(6,1)$, $(8,3)$, $(12,4)$, $(20,3)$, $(24,12)$, $(40,12)$, $(42,1)$, $(48,48)$, $(54,6)$, $(84,7)$, $(108,26)$, $(110,1)$, $(120,34)$, $(120,36)$. $\endgroup$ Commented Dec 13, 2015 at 6:54
  • $\begingroup$ I figured out how to modify the for loop I was using to test these groups to allow me to tackle the order 256 is smaller pieces (to avoid prohibitive runtime), and managed to test all 56,092 groups of order 256, verifying my prediction that none are isomorphic to their own automorphism group. I continued the tests up to order 383 and found a few more groups, which I have added to my post. $\endgroup$ Commented Mar 2, 2016 at 1:48
  • $\begingroup$ I further extended the list of $Aut$-stable groups up to order 511 (not doing order 512 anytime soon considering how many of them there are and how long it takes to test them). I already have made some interesting observations: They are all either centerless or have $Z(G)\simeq\mathbb{Z}_2$ (which are precisely the two groups that have trivial automorphism group, coincidence? I doubt it). $\endgroup$ Commented Mar 7, 2016 at 18:38
3
$\begingroup$

Remark: The comments below say that the group $G$ given here is not an example, since ${\rm Aut}({\rm Aut}(G))$ is isomorphic to ${\rm Aut}(G)$ rather than to $G$.

I think this anwers the question for infinite groups:

MR0470091 (57 #9858) Collins, Donald J. The automorphism towers of some one-relator groups. Proc. London Math. Soc. (3) 36 (1978), no. 3, 480--493. 20F55

Theorem (ii) states that if $G=\langle a,b \mid a^{-1}b^ra=b^s \rangle$ is a Baumslag-Solitar group with $r-s$ even, then $Aut(Aut(G))$ is isomorphic to $G$ and $G$ has an outer automorphism.

Moreover, when $r=1$, $G$ is the semidirect product $\mathbf Z \ltimes \mathbf Z[\frac 1 s]$, where $\mathbf Z$ acts via multiplication by $\frac 1 s$. Then $G$ is torsionfree, but $Aut(G)$ has an element of order 2 (see his lemma 3). If $G$ is represented as a matrix group, $(a,b) \mapsto \begin{pmatrix} s^a & b \\ 0 & 1 \end{pmatrix}$, then this outer automorphism is explicitely given by conjugation by $diag(i,-i)$, where $i$ is a square root of -1.

$\endgroup$
4
  • $\begingroup$ This looks like an example but there is one part of your argument that doesn't seem correct. By Lemma 1 of Collins, when $r=1$, the group $G$ is centreless. This means that $Aut(G)$ is also centreless and hence embeds in $Aut(Aut(G)) \cong G$. Thus $Aut(G)$ cannot have an element of finite order. Of course, given the statement of Collins' Theorem, it seems almost certain that one of his groups does provide an answer to the infinite case of my question. $\endgroup$ Commented Jun 12, 2010 at 12:26
  • 1
    $\begingroup$ Indeed, after reading the paper more closely I think Theorem (ii) should read that Aut(Aut(G)) is isomorphic to Aut(G), so this paper doesn't seem to provide an example. Sorry about that. $\endgroup$
    – Guntram
    Commented Jun 12, 2010 at 13:15
  • 1
    $\begingroup$ Looking more carefully at Collins' paper, I believe there is a typo in the statement of Theorem 1. Combining Proposition A and Proposition B, we see that $Aut(Aut(G)) \cong Aut(G)$ instead of $Aut(Aut(G)) \cong G$. And my previous comment shows that $Aut(Aut(G)) \not\cong G$. So I no longer believe that Collins' paper answers the infinite case of my question. $\endgroup$ Commented Jun 12, 2010 at 13:23
  • $\begingroup$ I see that we spotted the typo simultaneously! $\endgroup$ Commented Jun 12, 2010 at 13:24
3
$\begingroup$

I have been researching this question on my own time along with generally studying finite groups of small order in an attempt to better understand their structure, and I have come up with some results in those efforts that I haven't seen mentioned in this thread or the other similar ones I've found on this site. I had attempted to see if I could prove a bound for $|Aut^{(n)}(G)|$ and had thought to use the elementary fact that for $|G|=n$, $Aut(G)$ is a subgroup of $S_n$. The only problem is that the way that fact is proved doesn't generalize to the realization of $Aut(G)$ in $S_n$, if one could show that for any subgroup $H \subset S_n$ that $Aut(H)$ is a subgroup of $Aut(S_n)$ then we would have our bound immediately (namely $|Aut^{(k)}(G)| \leq n!$). Edit: It turns out this bound is not correct, as for $G=$SmallGroup(16,5), we have $|Aut^{(7)}(G)|>16!$, it is of order ~2 quadrillion, whereas 16! is about 20 trillion.

Something that might help with calculating automorphism groups in general and understanding how $Aut^{(k)}(G)$ determines $Aut^{(k+1)}(G)$ is a result I arrived at fairly recently that depends on an idea I've been interested in for a long time. The idea is that some elements of a given order in a group can be distinguished from one another by what role they play in the group structure, for instance the unique order 2 element in $D_8$ that commutes with all the other elements in $D_8$ is very distinct from the other 4 order 2 elements. The criterion I arrived at to capture this idea is that two elements of identical order belong to the same 'structural congruence class' if there is a lattice isomorphism between the sublattices of all the subgroups which contain the cyclic subgroup generated by the given element which respects the isomorphism classes of the subgroups in the given sublattices. As an example, returning to the order 2 elements in $D_8$, the remaining 4 elements belong to the same structural congruence class, they are all members of exactly 1 Klein four subgroup which is a subgroup of all of $D_8$, however there is an additional subtlety here, the 4 order 2 elements can be paired off by which Klein four subgroup they belong to (there are two Klein four subgroups of $D_8$, one is generated by the vertical and horizontal flips, the other by the diagonal flips). Combining this idea with an observation about the cyclic subgroups and generating sets yielded a very interesting result. The observation is that one can readily determine the minimum size of a generating set (and which sets will work) by analyzing the full subgroup lattice. The point is that the subgroup generated by two given elements is exactly the join of the cyclic subgroups they generate in the full subgroup lattice, hence in a 2-generated group, you will be able to find a pair of cyclic groups whose join is the entire group. In a 3-generated group, that does not occur, but a set of 3 cyclic subgroups will suffice, etc. You can also readily enumerate the full list of minimum size generating sets this way (and indeed you can usually use combinatorics to quickly count the possibilities once you find a few minimum size generating sets). Armed with a complete list of minimum size generating sets, you can use the fact that the action of any automorphism is determined by its action on a generating set, and that generator map to generators to determine the size of the automorphism group. You can only map a given generating set to one in which the elements are of the same classes as the ones in the generating set you are starting with. Returning to $D_8$, we see that the generating sets are those which contain an order 4 element and one of the 4 order 2 elements not generated by the order 4 elements as well as pairs of order 2 elements which do not commute (there are only 4 such pairs, since the order 2 elements not generated by the order 4 elements pair off based on membership in klein four subgroups and hence commute with each other, but not the whole group). These are two different 'classes' of generating sets. One of size 4, the other of size 8. In the smaller class, not only can you send the given generating set to any of the others, but you can also swap which generator is which, which gives 8 possible automorphisms. You can get these same automorphisms by determining where to send a generating set consisting of an order 4 and order 2 element instead. This procedure works in general (it is not terribly difficult to prove, though pinning down the precise definition of 'structural congruence class' may be tricky (notice in $D_8$ how the class with 4 order 2 elements further broke down into two 'subclasses' based on the pairs by whether or not they commuted with each other).

As final remarks, I have used GAP to compute $Aut^{(n)}(G)$ for all groups $G$ of order less than 32 up to the largest $n$ that GAP would compute in a reasonable amount of time (usually only 4-5 steps or until stabilization). Thos groups for which I have yet to show stabilization definitely undergo a serious combinatorial explosion. For instance the $G=SmallGroup(16,3)$ has $Aut(G) \simeq SmallGroup(32,27)$

$Aut^{(2)}(G) \simeq SmallGroup(384,20100)$

$Aut^{(3)}(G) \simeq $ a group of order 2304 with 8 generators

$Aut^{(4)}(G) \simeq $ a group of order 110592 with 7 generators This last group took roughly 15 seconds for GAP to even construct, asking it to give a structure description took over 10 minutes and required nearly 2GB of RAM (!!). Asking it to find $Aut^{(5)}(G)$ was unsuccessful even after 5 hours of computation and again using nearly 2GB of RAM (creating $Aut^{(4)}(G)$ only took a about 150MB, though the structure description took WAY more).

I just completed computing $Aut^{(4)}(G)$ for SmallGroup(16,5), which took about an hour, though the group is of only of order 1536 (no doubt the structural complexity of groups with a high prime power in their order had something to do w/ that, it also took nearly 600MB of RAM to do it), and I haven't even asked for a structure description.

$\endgroup$
14
  • $\begingroup$ What are you doing such that your GAP computations take that long? -- For me it takes only a few moments to see e.g. that the automorphism tower of $G$ = SmallGroup(16,3) stabilizes at ${\rm Aut}^{(6)}(G)$, which is a group of order 442368. $\endgroup$
    – Stefan Kohl
    Commented Dec 9, 2015 at 11:29
  • $\begingroup$ @StefanKohl: I am also observing long runtime using GAP 4.7.9. Which version of GAP do you use? $\endgroup$ Commented Dec 9, 2015 at 15:03
  • 1
    $\begingroup$ @AlexanderKonovalov: I am using GAP 4.8.0. -- But what rather matters is probably that I convert the automorphism groups to permutation groups in between, and also reduce the numbers of generators and the degree if possible. Just computing AutomorphismGroup(AutomorphismGroup(AutomorphismGroup( ...))) will of course yield extremely low performance ... . $\endgroup$
    – Stefan Kohl
    Commented Dec 9, 2015 at 15:12
  • $\begingroup$ @StefanKohl: thanks - yes, I think that is the crucial technique. Maybe converting to PC groups would also be fine, but by all means avoiding leaving them represented as groups of adthomorphisms. $\endgroup$ Commented Dec 9, 2015 at 15:27
  • 3
    $\begingroup$ I was able to verify that $G=$SmallGroup(16,3) stabilizes at $Aut^{(6)}(G)$. I also looked into $G=$SmallGroup(16,5)'s Automorphism series, but was running into problems with the combinatorial explosion that occurred, as $Aut^{(7)}(G)$ is of order 2,078,076,976,496,640 (that's 2 quadrillion), and as far as I can tell, it does not appear to stabilize at $n=7$ although I cannot be certain as attempting to construct $Aut^{(8)}(G)$ is running out of RAM (why won't GAP let me use more than 2gb? with -o set to that, it should prompt for return; and let me double that, but it just crashes instead). $\endgroup$ Commented Dec 9, 2015 at 22:04

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .