Skip to main content
added 5 characters in body
Source Link
Andreas Blass
  • 73.2k
  • 8
  • 191
  • 290

In the case of regular polygons inscribed in a circle, you get addition of errors if you start with a chord that's supposed to be one side of the polygon and copy it all the way around in one direction. You may be better off proceeding equally in both directions until it is time to close the polygon, or perhaps even constructing a chord that subtends two sides and getting the intermediate vertex using a perpendicular bisector.

I invite readers to do some experiments with the regular pentagon. We use Ptolemy's pricedure as our point of departure, which I describe below:

  1. Construct a pair of parallelperpendicular lines, which intersect at O.

  2. Construct a circle centered at O, passing through points A,B,C,D on the perpendicular lines in rotational order.

  3. Bisect line segment OA to generate its midpoint M.

  4. Draw an arc centered on M passing through B, which intersects line segment OC at E.

  5. Set the compass radius to natch OE, whose chord length is correct to intercept an arc of 72°, and mark off successive points at this distance along the circle starting at B, generatong points F,G,H,I.

  6. Connect B,F,G,H,I in rotatational order using the straightedge to draw the pentagon.

Experiment 1: In the Step 5, mark off two points starting from B going clockwise amd two going counterclockwise. Compare your result with marking all the points offing just one direction.

Experiment 2: Instead of placing E in Step 4 on line segment OC, extend OA and place E on this extension, not OC. Then continue as below:

  1. Draw the arc centered at B passing through E, whose radius is the chord length that intercepts a 144° arc. This intersects the circle at points F and G.

  2. Perpendicularly bisect BF to identify point H on the circle, on the minor arc from B to F.

  3. Draw the arc centered on B passing through H which also intersects the I intially constructed circle at I.

  4. Go back to Step 6 of the original construction.

Experiment 1 explores multiplying a slightly off-ideal chord by a smaller number, while Experiment 2 involves dividing instead of multiplying the chord. Readers are invited to comment on the relative accuracy if pentagons obtained by these methods.

In the case of regular polygons inscribed in a circle, you get addition of errors if you start with a chord that's supposed to be one side of the polygon and copy it all the way around in one direction. You may be better off proceeding equally in both directions until it is time to close the polygon, or perhaps even constructing a chord that subtends two sides and getting the intermediate vertex using a perpendicular bisector.

I invite readers to do some experiments with the regular pentagon. We use Ptolemy's pricedure as our point of departure, which I describe below:

  1. Construct a pair of parallel lines, which intersect at O.

  2. Construct a circle centered at O, passing through points A,B,C,D on the perpendicular lines in rotational order.

  3. Bisect line segment OA to generate its midpoint M.

  4. Draw an arc centered on M passing through B, which intersects line segment OC at E.

  5. Set the compass radius to natch OE, whose chord length is correct to intercept an arc of 72°, and mark off successive points at this distance along the circle starting at B, generatong points F,G,H,I.

  6. Connect B,F,G,H,I in rotatational order using the straightedge to draw the pentagon.

Experiment 1: In the Step 5, mark off two points starting from B going clockwise amd two going counterclockwise. Compare your result with marking all the points offing just one direction.

Experiment 2: Instead of placing E in Step 4 on line segment OC, extend OA and place E on this extension, not OC. Then continue as below:

  1. Draw the arc centered at B passing through E, whose radius is the chord length that intercepts a 144° arc. This intersects the circle at points F and G.

  2. Perpendicularly bisect BF to identify point H on the circle, on the minor arc from B to F.

  3. Draw the arc centered on B passing through H which also intersects the I intially constructed circle at I.

  4. Go back to Step 6 of the original construction.

Experiment 1 explores multiplying a slightly off-ideal chord by a smaller number, while Experiment 2 involves dividing instead of multiplying the chord. Readers are invited to comment on the relative accuracy if pentagons obtained by these methods.

In the case of regular polygons inscribed in a circle, you get addition of errors if you start with a chord that's supposed to be one side of the polygon and copy it all the way around in one direction. You may be better off proceeding equally in both directions until it is time to close the polygon, or perhaps even constructing a chord that subtends two sides and getting the intermediate vertex using a perpendicular bisector.

I invite readers to do some experiments with the regular pentagon. We use Ptolemy's pricedure as our point of departure, which I describe below:

  1. Construct a pair of perpendicular lines, which intersect at O.

  2. Construct a circle centered at O, passing through points A,B,C,D on the perpendicular lines in rotational order.

  3. Bisect line segment OA to generate its midpoint M.

  4. Draw an arc centered on M passing through B, which intersects line segment OC at E.

  5. Set the compass radius to natch OE, whose chord length is correct to intercept an arc of 72°, and mark off successive points at this distance along the circle starting at B, generatong points F,G,H,I.

  6. Connect B,F,G,H,I in rotatational order using the straightedge to draw the pentagon.

Experiment 1: In the Step 5, mark off two points starting from B going clockwise amd two going counterclockwise. Compare your result with marking all the points offing just one direction.

Experiment 2: Instead of placing E in Step 4 on line segment OC, extend OA and place E on this extension, not OC. Then continue as below:

  1. Draw the arc centered at B passing through E, whose radius is the chord length that intercepts a 144° arc. This intersects the circle at points F and G.

  2. Perpendicularly bisect BF to identify point H on the circle, on the minor arc from B to F.

  3. Draw the arc centered on B passing through H which also intersects the I intially constructed circle at I.

  4. Go back to Step 6 of the original construction.

Experiment 1 explores multiplying a slightly off-ideal chord by a smaller number, while Experiment 2 involves dividing instead of multiplying the chord. Readers are invited to comment on the relative accuracy if pentagons obtained by these methods.

Source Link
Oscar Lanzi
  • 2.4k
  • 21
  • 20

In the case of regular polygons inscribed in a circle, you get addition of errors if you start with a chord that's supposed to be one side of the polygon and copy it all the way around in one direction. You may be better off proceeding equally in both directions until it is time to close the polygon, or perhaps even constructing a chord that subtends two sides and getting the intermediate vertex using a perpendicular bisector.

I invite readers to do some experiments with the regular pentagon. We use Ptolemy's pricedure as our point of departure, which I describe below:

  1. Construct a pair of parallel lines, which intersect at O.

  2. Construct a circle centered at O, passing through points A,B,C,D on the perpendicular lines in rotational order.

  3. Bisect line segment OA to generate its midpoint M.

  4. Draw an arc centered on M passing through B, which intersects line segment OC at E.

  5. Set the compass radius to natch OE, whose chord length is correct to intercept an arc of 72°, and mark off successive points at this distance along the circle starting at B, generatong points F,G,H,I.

  6. Connect B,F,G,H,I in rotatational order using the straightedge to draw the pentagon.

Experiment 1: In the Step 5, mark off two points starting from B going clockwise amd two going counterclockwise. Compare your result with marking all the points offing just one direction.

Experiment 2: Instead of placing E in Step 4 on line segment OC, extend OA and place E on this extension, not OC. Then continue as below:

  1. Draw the arc centered at B passing through E, whose radius is the chord length that intercepts a 144° arc. This intersects the circle at points F and G.

  2. Perpendicularly bisect BF to identify point H on the circle, on the minor arc from B to F.

  3. Draw the arc centered on B passing through H which also intersects the I intially constructed circle at I.

  4. Go back to Step 6 of the original construction.

Experiment 1 explores multiplying a slightly off-ideal chord by a smaller number, while Experiment 2 involves dividing instead of multiplying the chord. Readers are invited to comment on the relative accuracy if pentagons obtained by these methods.