Return to Answer

There is such an interpretation, with a few caveats. Essentially, there is a canonical connection on a certain vector bundle for which the "principle part" of the curvature is the Weyl tensor in dimensions $n\geq4$, and the Cotton tensor when $n=3$. I will describe this from the point of view of the tractor calculus, but avoid introducing unnecessary bundles where needed. This can also be described using the Fefferman--Graham ambient metric or using Cartan connections. This summary mostly follows Bailey--Eastwood--Gover, though Armstong and articles written by Gover are also good references. I use abstract index notation throughout.

Next, we define the space of sections of the standard tractor bundle. Fix a metric $g\in c$. Define $\mathcal{T}_g^A=\mathcal{E}[1]\oplus\mathcal{E}^i[-1]\oplus\mathcal{E}[-1]$. Given another metric $\hat g := e^{2\Upsilon}g\in c$, we identify $(\sigma,v^i,\rho)\in\mathcal{T}_g^A$ with $(\hat\sigma,\hat v^i,\hat\rho)\in\mathcal{T}_{\hat g}^A$ if $$ \begin{pmatrix} \hat\sigma \\ \hat v^i \\ \hat\rho \end{pmatrix} = \begin{pmatrix} \sigma \\ v^i + \sigma\Upsilon^i \\ \rho - \Upsilon_j v^j - \frac{1}{2}\Upsilon^2\sigma \end{pmatrix} . $$ (Recall these are densities, so exponential factors are suppressed.) The space of sections $\mathcal{T}^A$ is the result after making this identification. Note that the top-most nonvanishing component is actually conformally invariant modulo multiplication by an exponential factor. Because of this, we call the top-most nonvanishing component the projecting part.

Added in response to a comment. There are many geometric motivations for introducing the standard tractor bundle. One is that the conformal group of the sphere is $SO(n+1,1)$, so it makes sense that the right replacement of the tangent bundle of a conformal $n$-manifold should be a bundle of rank $n+2$, as is the standard tractor bundle. Note that the metric on $\mathcal{T}$ has signature $(n+1,1)$, assuming we start with a conformal manifold of Riemannian signature (if $c$ has signature $(p,q)$, the metric on the standard tractor bundle has signature $(p+1,q+1)$).

Another motivation comes from the ambient metric. First, note that the flat conformal sphere $(S^n,c)$ (i.e. the conformal class of the round $n$-sphere) can be identified with the positive null cone $\mathcal{N}$ centered at the origin in $\mathbb{R}^{n+1,1}$. This is done by noting that the projectivization of $\mathcal{N}$ is $S^n$ and identifying sections of $\pi\colon\mathcal{N}\to S^n$ with metrics in the conformal class $c$ by pullback of the Minkowski metric. (Incidentally, this leads to a proof that $SO(n+1,1)$ is the conformal group of $S^n$.) In this case, a fiber $\mathcal{T}_x$ of the standard tractor bundle is identified with $T_p\mathbb{R}^{n+1,1}$ for some $p\in\pi^{-1}(x)$; this is made independent of the choice of $p\in\pi^{-1}(x)$ by identifying tangent spaces at points subject to a homogeneity condition matching that of $\mathcal{E}^i[-1]$ above. The standard tractor connection is then induced by the Levi-Civita connection in Minkowski space, after making some identifications.

For a general conformal manifold $(M^n,c)$ of Riemannian signature, Fefferman and Graham showed that there is a "unique" Lorentzian manifold $(\widetilde{\mathcal{G}},\widetilde{g})$ which is "formally Ricci flat" and in which $(M^n,c)$ isometrically embeds as a null cone. Here formally Ricci flat means that the Ricci tensor of $\widetilde{g}$ vanishes to some order, depending on the parity of $n$, along the null cone, and I write unique in quotes because the metric is only determined as a power series to some order along the cone, and this up to diffeomorphism. One recovers the standard tractor bundle and its canonical connection from that of $(\widetilde{\mathcal{G}},\widetilde{g})$ as in the previous paragraph. See Fefferman--Graham for details, or Čap--Gover for a detailed description of the relation between the tractor calculus and the ambient metric, including the identifications I didn't detail. A similar construction for other signatures works, consistent with what is described in the previous paragraph.

There is such an interpretation, with a few caveats. Essentially, there is a canonical connection on a certain vector bundle for which the "principal part" of the curvature is the Weyl tensor in dimensions $n\geq4$, and the Cotton tensor when $n=3$. I will describe this from the point of view of the tractor calculus, but avoid introducing unnecessary bundles where needed. This can also be described using the Fefferman–Graham ambient metric or using Cartan connections. This summary mostly follows Bailey–Eastwood–Gover, though Armstrong and articles written by Gover are also good references. I use abstract index notation throughout.

Next, we define the space of sections of the standard tractor bundle. Fix a metric $g\in c$. Define $\mathcal{T}_g^A=\mathcal{E}[1]\oplus\mathcal{E}^i[-1]\oplus\mathcal{E}[-1]$. Given another metric $\hat g \mathrel{:=} e^{2\Upsilon}g\in c$, we identify $(\sigma,v^i,\rho)\in\mathcal{T}_g^A$ with $(\hat\sigma,\hat v^i,\hat\rho)\in\mathcal{T}_{\hat g}^A$ if $$ \begin{pmatrix} \hat\sigma \\ \hat v^i \\ \hat\rho \end{pmatrix} = \begin{pmatrix} \sigma \\ v^i + \sigma\Upsilon^i \\ \rho - \Upsilon_j v^j - \frac{1}{2}\Upsilon^2\sigma \end{pmatrix} . $$ (Recall these are densities, so exponential factors are suppressed.) The space of sections $\mathcal{T}^A$ is the result after making this identification. Note that the top-most nonvanishing component is actually conformally invariant modulo multiplication by an exponential factor. Because of this, we call the top-most nonvanishing component the projecting part.

Added in response to a comment. There are many geometric motivations for introducing the standard tractor bundle. One is that the conformal group of the sphere is $\operatorname{SO}(n+1,1)$, so it makes sense that the right replacement of the tangent bundle of a conformal $n$-manifold should be a bundle of rank $n+2$, as is the standard tractor bundle. Note that the metric on $\mathcal{T}$ has signature $(n+1,1)$, assuming we start with a conformal manifold of Riemannian signature (if $c$ has signature $(p,q)$, the metric on the standard tractor bundle has signature $(p+1,q+1)$).

Another motivation comes from the ambient metric. First, note that the flat conformal sphere $(S^n,c)$ (i.e., the conformal class of the round $n$-sphere) can be identified with the positive null cone $\mathcal{N}$ centered at the origin in $\mathbb{R}^{n+1,1}$. This is done by noting that the projectivization of $\mathcal{N}$ is $S^n$ and identifying sections of $\pi\colon\mathcal{N}\to S^n$ with metrics in the conformal class $c$ by pullback of the Minkowski metric. (Incidentally, this leads to a proof that $\operatorname{SO}(n+1,1)$ is the conformal group of $S^n$.) In this case, a fiber $\mathcal{T}_x$ of the standard tractor bundle is identified with $T_p\mathbb{R}^{n+1,1}$ for some $p\in\pi^{-1}(x)$; this is made independent of the choice of $p\in\pi^{-1}(x)$ by identifying tangent spaces at points subject to a homogeneity condition matching that of $\mathcal{E}^i[-1]$ above. The standard tractor connection is then induced by the Levi–Civita connection in Minkowski space, after making some identifications.

For a general conformal manifold $(M^n,c)$ of Riemannian signature, Fefferman and Graham showed that there is a "unique" Lorentzian manifold $(\widetilde{\mathcal{G}},\widetilde{g})$ which is "formally Ricci flat" and in which $(M^n,c)$ isometrically embeds as a null cone. Here formally Ricci flat means that the Ricci tensor of $\widetilde{g}$ vanishes to some order, depending on the parity of $n$, along the null cone, and I write unique in quotes because the metric is only determined as a power series to some order along the cone, and this up to diffeomorphism. One recovers the standard tractor bundle and its canonical connection from that of $(\widetilde{\mathcal{G}},\widetilde{g})$ as in the previous paragraph. See Fefferman–Graham for details, or Čap–Gover for a detailed description of the relation between the tractor calculus and the ambient metric, including the identifications I didn't detail. A similar construction for other signatures works, consistent with what is described in the previous paragraph.

Added in response to a comment. There are many geometric motivations for introducing the standard tractor bundle. One is that the conformal group of the sphere is $SO(n+1,1)$, so it makes sense that the right replacement of the tangent bundle of a conformal $n$-manifold should be a bundle of rank $n+2$, as is the standard tractor bundle. Note that the metric on $\mathcal{T}$ has signature $(n+1,1)$, assuming we start with a conformal manifold of Riemannian signature (if $c$ has signature $(p,q)$, the metric on the standard tractor bundle has signature $(p+1,q+1)$).

Another motivation comes from the ambient metric. First, note that the flat conformal sphere $(S^n,c)$ (i.e. the conformal class of the round $n$-sphere) can be identified with the positive null cone $\mathcal{N}$ centered at the origin in $\mathbb{R}^{n+1,1}$. This is done by noting that the projectivization of $\mathcal{N}$ is $S^n$ and identifying sections of $\pi\colon\mathcal{N}\to S^n$ with metrics in the conformal class $c$ by pullback of the Minkowski metric. (Incidentally, this leads to a proof that $SO(n+1,1)$ is the conformal group of $S^n$.) In this case, a fiber $\mathcal{T}_x$ of the standard tractor bundle is identified with $T_p\mathbb{R}^{n+1,1}$ for some $p\in\pi^{-1}(x)$; this is made independent of the choice of $p\in\pi^{-1}(x)$ by identifying tangent spaces at points subject to a homogeneity condition matching that of $\mathcal{E}^i[-1]$ above. The standard tractor connection is then induced by the Levi-Civita connection in Minkowski space, after making some identifications.

For a general conformal manifold $(M^n,c)$ of Riemannian signature, Fefferman and Graham showed that there is a "unique" Lorentzian manifold $(\widetilde{\mathcal{G}},\widetilde{g})$ which is "formally Ricci flat" and in which $(M^n,c)$ isometrically embeds as a null cone. Here formally Ricci flat means that the Ricci tensor of $\widetilde{g}$ vanishes to some order, depending on the parity of $n$, along the null cone, and I write unique in quotes because the metric is only determined as a power series to some order along the cone, and this up to diffeomorphism. One recovers the standard tractor bundle and its canonical connection from that of $(\widetilde{\mathcal{G}},\widetilde{g})$ as in the previous paragraph. See Fefferman--Graham for details, or Čap--Gover for a detailed description of the relation between the tractor calculus and the ambient metric, including the identifications I didn't detail. A similar construction for other signatures works, consistent with what is described in the previous paragraph.

There is such an interpretation, with a few caveats. Essentially, there is a canonical connection on a certain vector bundle for which the "principle part" of the curvature is the Weyl tensor in dimensions $n\geq4$, and the Cotton tensor when $n=3$. I will describe this from the point of view of the tractor calculus, but avoid introducing unnecessary bundles where needed. This can also be described using the Fefferman--Graham ambient metric or using Cartan connections. This summary mostly follows Bailey--Eastwood--Gover, though Armstong and articles written by Gover are also good references. I use abstract index notation throughout.

First, we define conformal densities. Given a conformal manifold $(M,c)$, a conformal density of weight $w\in\mathbb{R}$ is an equivalence class of pairs $(g,f)\in c\times C^\infty(M)$ with respect to the equivalence relation $(g,f)\sim(e^{2\Upsilon}g,e^{w\Upsilon}f)$. Let $\mathcal{E}[w]$ denote the space of conformal densities of weight $w$. We similarly define $\mathcal{E}^i[w]$ as the space of equivalence classes of pairs $(g,v^i)\in c\times\mathfrak{X}(M)$ with respect to the equivalence relation $(g,v^i)\sim(e^{2\Upsilon}g,e^{w\Upsilon}v^i)$. Here $\mathfrak{X}(M)$ is the space of vector fields on $M$.

Next, we define the space of sections of the standard tractor bundle. Fix a metric $g\in c$. Define $\mathcal{T}_g^A=\mathcal{E}[1]\oplus\mathcal{E}^i[-1]\oplus\mathcal{E}[-1]$. Given another metric $\hat g := e^{2\Upsilon}g\in c$, we identify $(\sigma,v^i,\rho)\in\mathcal{T}_g^A$ with $(\hat\sigma,\hat v^i,\hat\rho)\in\mathcal{T}_{\hat g}^A$ if $$ \begin{pmatrix} \hat\sigma \\ \hat v^i \\ \hat\rho \end{pmatrix} = \begin{pmatrix} \sigma \\ v^i + \sigma\Upsilon^i \\ \rho - \Upsilon_j v^j - \frac{1}{2}\Upsilon^2\sigma \end{pmatrix} . $$ (Recall these are densities, so exponential factors are suppressed.) The space of sections $\mathcal{T}^A$ is the result after making this identification. Note that the top-most nonvanishing component is actually conformally invariant modulo multiplication by an exponential factor. Because of this, we call the top-most nonvanishing component the projecting part.

There is a canonical connection on (the vector bundle whose space of sections is) $\mathcal{T}^A$, the standard tractor connection, which, given a choice of metric $g\in c$, is given by the formula $$ \nabla_j \begin{pmatrix} \sigma \\ v^i \\ \rho \end{pmatrix} = \begin{pmatrix} \nabla_j\sigma - v_j \\ \nabla_j v^i + \sigma P_j^i + \delta_j^i\rho \\ \nabla_j\rho - P_{ji}v^i \end{pmatrix} . $$ Here $P_{ij}=\frac{1}{n-2}\left( R_{ij} - \frac{R}{2(n-1)}g\right)$ is the Schouten tensor and $n=\dim M$. It is straightforward to check that this is well-defined, in the sense that it is independent of the choice of matrix $g\in c$.

Given a metric $g\in c$, it is straightforward to compute that $$ (\nabla_i\nabla_j - \nabla_j\nabla_i)\begin{pmatrix} \sigma \\ v^k \\ \rho \end{pmatrix} = \begin{pmatrix} 0 & 0 & 0 \\ C_{ij}{}^k & W_{ij}{}^k{}_l & 0 \\ 0 & -C_{ijl} & 0 \end{pmatrix} \begin{pmatrix} \sigma \\ v^l \\ \rho \end{pmatrix} . $$ This is conformally invariant by construction. The "3-by-3" matrix is the tractor curvature, and its projecting part is $W_{ij}{}^k{}_l$ when $n\geq4$ and $C_{ij}{}^k$ when $n=3$. Standard interpretations of holonomy then give the interpretation of the Weyl tensor in terms of parallel transport around infinitesimal loops that I indicated in the first paragraph.

Finally, given your bullet points, let me emphasize that the signature of $c$ plays no role here, and everything is manifestly conformally invariant.

There is such an interpretation, with a few caveats. Essentially, there is a canonical connection on a certain vector bundle for which the "principle part" of the curvature is the Weyl tensor in dimensions $n\geq4$, and the Cotton tensor when $n=3$. I will describe this from the point of view of the tractor calculus, but avoid introducing unnecessary bundles where needed. This can also be described using the Fefferman--Graham ambient metric or using Cartan connections. This summary mostly follows Bailey--Eastwood--Gover, though Armstong and articles written by Gover are also good references. I use abstract index notation throughout.

First, we define conformal densities. Given a conformal manifold $(M,c)$, a conformal density of weight $w\in\mathbb{R}$ is an equivalence class of pairs $(g,f)\in c\times C^\infty(M,c)$ with respect to the equivalence relation $(g,f)\sim(e^{2\Upsilon}g,e^{w\Upsilon}f)$. Let $\mathcal{E}[w]$ denote the space of conformal densities of weight $w$. We similarly define $\mathcal{E}^i[w]$ as the space of equivalence classes of pairs $(g,v^i)\in c\times\mathfrak{X}(M)$ with respect to the equivalence relation $(g,v^i)\sim(e^{2\Upsilon}g,e^{w\Upsilon}v^i)$. Here $\mathfrak{X}(M)$ is the space of vector fields on $M$.

Next, we define the space of sections of the standard tractor bundle. Fix a metric $g\in c$. Define $\mathcal{T}_g^A=\mathcal{E}[1]\oplus\mathcal{E}^i[-1]\oplus\mathcal{E}[-1]$. Given another metric $\hat g := e^{2\Upsilon}g\in c$, we identify $(\sigma,v^i,\rho)\in\mathcal{T}_g^A$ with $(\hat\sigma,\hat v^i,\hat\rho)\in\mathcal{T}_{\hat g}^A$ if $$ \begin{pmatrix} \hat\sigma \\ \hat v^i \\ \hat\rho \end{pmatrix} = \begin{pmatrix} \sigma \\ v^i + \sigma\Upsilon^i \\ \rho - \Upsilon_j v^j - \frac{1}{2}\Upsilon^2\sigma \end{pmatrix} . $$ (Recall these are densities, so exponential factors are suppressed.) The space of sections $\mathcal{T}^A$ is the result after making this identification. Note that the top-most nonvanishing component is actually conformally invariant modulo multiplication by an exponential factor. Because of this, we call the top-most nonvanishing component the projecting part.

There is a canonical connection on (the vector bundle whose space of sections is) $\mathcal{T}^A$, the standard tractor connection, which, given a choice of metric $g\in c$, is given by the formula $$ \nabla_j \begin{pmatrix} \sigma \\ v^i \\ \rho \end{pmatrix} = \begin{pmatrix} \nabla_j\sigma - v_j \\ \nabla_j v^i + \sigma P_j^i + \delta_j^i\rho \\ \nabla_j\rho - P_{ji}v^i \end{pmatrix} . $$ Here $P_{ij}=\frac{1}{n-2}\left( R_{ij} - \frac{R}{2(n-1)}g\right)$ is the Schouten tensor and $n=\dim M$. It is straightforward to check that this is well-defined, in the sense that it is independent of the choice of matrix $g\in c$.

Given a metric $g\in c$, it is straightforward to compute that $$ (\nabla_i\nabla_j - \nabla_j\nabla_i)\begin{pmatrix} \sigma \\ v^k \\ \rho \end{pmatrix} = \begin{pmatrix} 0 & 0 & 0 \\ C_{ij}{}^k & W_{ij}{}^k{}_l & 0 \\ 0 & -C_{ijl} & 0 \end{pmatrix} \begin{pmatrix} \sigma \\ v^l \\ \rho \end{pmatrix} . $$ This is conformally invariant by construction. The "3-by-3" matrix is the tractor curvature, and its projecting part is $W_{ij}{}^k{}_l$ when $n\geq4$ and $C_{ij}{}^k$ when $n=3$. Standard interpretations of holonomy then give the interpretation of the Weyl tensor in terms of parallel transport around infinitesimal loops that I indicated in the first paragraph.

Finally, given your bullet points, let me emphasize that the signature of $c$ plays no role here, and everything is manifestly conformally invariant.