10
$\begingroup$

Several authors (also of standard RiemGeo books) write that the sectional curvature of a plane $\pi$ contained in $T_pM$, where $(M,g)$ is a Riemannian manifold of any dimension, is the "Gaussian curvature" in $p$ of the surface $S$ generated by the geodesics starting at $p$, with tangent velocity belonging to $\pi$. Then,unfortunately and surprisingly, they define the Gaussian curvature for surfaces embedded in $\mathbb R^3$. I do not really have an idea why, since the situation is completely different. You actually need a definition of Gaussian curvature for abstract surfaces or at least for surfaces embedded in a generic Riemannian manifold (at least $\mathbb R^n$, with $n\geq 4$, by Nash embedding Thm that would be sufficient) with any codimension, not only for embedded surfaces in $\mathbb R^3$, since not every abstract surface can be isometrically embedded in $\mathbb R^3$. Hence, also mentioning the "Theorema egregium" has apparently nothing to do with that, since it deals with surfaces in $\mathbb R^3$, and this is completely not the case. Moreover they usually say that this was the way (what way? It is not defined!) Riemann generalizes to abstract manifold the concept of curvature... I never saw the original papers of Riemann, so I cannot say if this is true or not, but something is not quite clear here. Hence, here are my (first) questions:

  • What is the definition of Gaussian curvature for an abstract surface? At least for isometrically embedded surfaces in $\mathbb R^n$, with $n\geq 4$? - Definition almost impossible to be found clear in these books (up to my knowledge... if I am wrong, my mistake) and around the web...

  • How Riemann really defined sectional curvatures? Does someone really know?

  • Why people mention the "Theorema egregium", that deals with a completely different situation? Clearly not this one...

$\endgroup$
5
  • 1
    $\begingroup$ Are you perhaps suggesting that the intrinsic geometry of a Riemannian $2$-manifold, including Gauss curvature, should be presented carefully before the concept of sectional curvature? $\endgroup$
    – Deane Yang
    Nov 9, 2019 at 1:08
  • $\begingroup$ Well... at least a definition of Gauss curvature for abstract surfaces... at least if you then mention it :-) $\endgroup$ Nov 9, 2019 at 1:14
  • $\begingroup$ Anyway, do you know a reference to such definition in standard books or papers? I was not able to find it... I think it is necessary, if you want to say the usual sentence that the sectional curvature is the Gauss curvature... etc, etc (or am I wrong?) $\endgroup$ Nov 9, 2019 at 1:36
  • $\begingroup$ Can you give examples of the "several authors" who refer to the Gaussian curvature in a setting other than surfaces embedded in $\mathbb{R}^3$? It is typical (and good exposition!) to note that sectional curvature is equivalent to Gaussian curvature in that setting, but for me it is implicit that if someone says "Gaussian curvature" then they are automatically referring to a surface in $\mathbb{R}^3$. It is customary to assume when writing a Riemannian geometry textbook that the reader is already familiar with this special case. $\endgroup$ Nov 9, 2019 at 11:46
  • $\begingroup$ For instance, the 1.Introduction to the curvature Chapter 4 in Do Carmo book "Riemannian geometry", page 88 or also Spivak, vol 2 chapter 4, Proposition 8 (also 7). There Spivak clearly speaks of Gaussian curvature of an abstract surface (not embedded in $\mathbb R^3$) without defining it, or at least I did not find it. $\endgroup$ Nov 9, 2019 at 12:07

4 Answers 4

11
$\begingroup$

There is no standard / classical definition of Gaussian curvature except for surfaces embedded in $\mathbb{R}^3$. I think the pattern of exposition that the OP is asking about is really just an allusion to an unjustified assumption made by Riemann as he was inventing what we now know as intrinsic geometry. This assumption lead to some interesting mathematics, and it's worth going into a bit more detail.

In the comments the OP cited page 88 of do Carmo's book on Riemannian geometry as an example; I'll use that to frame my answer (I don't have a copy of Spivak, vol 2 handy).

Do Carmo reviews the following proposed definition of sectional curvature, attributed to Riemann himself. (Note that this is the introduction to the chapter on curvature, intended as motivation rather than the official definition.) Take a point $p$ in a Riemannian manifold $M$ and a tangent plane $\sigma$ at $p$. Apply the exponential map to a small (exponential) neighborhood of the origin in $\sigma$ to obtain a 2-dimensional submanifold $S$ of $M$ containing $p$. Do Carmo writes, "Since Gauss had proved that the curvature of a surface can be expressed in terms of its metric, so Riemann could speak of the curvature of $S$ at $p$... This was the curvature considered by Riemann in [Ri]." ([Ri] being Riemann's "On the hypotheses which lie at the foundations of geometry".)

Implicitly, what this means is:

  1. Isometrically embed $S$ as a surface in $\mathbb{R}^3$.
  2. Compute the Gaussian curvature at the image of the point $p$.
  3. By Gauss' Theorema Egregium, this number does not depend on the chosen isometric embedding, and hence we can define the curvature of $(p, \sigma)$ to be this number.

The OP objects to step 1, with justification. But note that this procedure does not require the existence of isometric embeddings of arbitrary 2-dimensional Riemannian manifolds in $\mathbb{R}^3$, only local isometric embeddings. This is easier: for instance, the pseudosphere is locally isometric to the hyperbolic plane.

Of course, Riemann did not attempt to rigorously justify step 1. Riemann's "On the hypotheses..." was not a formal mathematical paper with definitions and theorems - it was lecture in which Riemann was proposing the possibility of doing geometry outside of the confines of ambient Euclidean space, and how it might work. In 1873 - not long after Riemann's lecture was published - Schlaefli conjectured that every smooth Riemannian $n$-manifold admits a smooth local isometric embedding in Euclidean space of dimension $\frac{n(n+1)}{2}$ (which would include step 1 as a special case), and this was proved by Janet and Cartan in 1926 for analytic metrics. The smooth case is still open, even for $n=2$! It comes down to finding local solutions to a certain partial differential equation, and the problem is that the type of the equation (elliptic / hyperbolic) depends on the sign of the curvature.

So that's the story. The proposed definition of sectional curvature above isn't actually viable, but it is historically part of how the theory got off the ground. And of course it wasn't long before Christoffel wrote down formulas for sectional curvature which don't depend on any embedding.

$\endgroup$
3
  • 1
    $\begingroup$ Thanks Paul, what you wrote is exactly what I had in mind and actually what I am going to write in my notes for the students of my course in RiemGeo. My question came from a question of a (smart) student after I told them about such construction to give an intuition of the definition of curvature and after I realize that we need a local isometric embedding that I knew was an open problem. $\endgroup$ Nov 9, 2019 at 15:49
  • $\begingroup$ I was just asking myself why several authors do not underline that such argument is not completely rigorous, why they actually speak of Gaussian curvature of an abstract surface (this is the most strange point to me, it can confuse the reader that is not going to find the definition), and ultimately why they do not write all the story as you did very clearly and shortly, at least in a footnote. $\endgroup$ Nov 9, 2019 at 15:49
  • 1
    $\begingroup$ @CarloMantegazza Yeah, including more of the story probably could improve the exposition - it's interesting to know that Riemann's original proposed definition makes contact with problems that are still open, and this underscores the importance of having intrinsic definitions. $\endgroup$ Nov 10, 2019 at 6:04
5
$\begingroup$

At the end of classical proofs of the Theorema Egregium you end up with a (messy) which expresses the Gauss curvature K of g as a function of the the metric coefficients and their partial derivative (I’ve seen this expression called Brioschi’s formula). This can be taken as a definition of Gaussian curvature for abstract Riemannian surfaces. This gives a possible answer to your first question. Another way would be to use an orthonormal coframe and Cartan’s structure equations which are pretty easy to handle in 2D. Yet another way (somehow backwards) would be to say that the gauss curvature is the function that makes local Gauss Bonnet work.

As for how Riemann introduced sectional curvature, there a nice comment of Riemann’s dissertation in vol 2 or 3 of Spivak.

$\endgroup$
2
  • $\begingroup$ Thanks, can you please tell me the pages in Spivak vol 2 or 3? $\endgroup$ Nov 9, 2019 at 1:16
  • $\begingroup$ are pages in vol 2. They depend if you have vol 2 from 1970 o from 1979. Actually, about Riemann's curvature tensor Marcel Berger in "A Panoramic View of Riemannian Geometry" cited the following interesting article : core.ac.uk/download/pdf/11394694.pdf?repositoryId=351 $\endgroup$
    – Holonomia
    Nov 10, 2019 at 10:50
2
$\begingroup$

Here are some unusual definitions of the Gaussian curvature of a smooth surface $\newcommand{\bR}{\mathbb{R}}$ $\Sigma\subset\bR^N$ equipped with the induced metric. $\newcommand{\bp}{\boldsymbol{p}}$ $\newcommand{\bq}{\boldsymbol{q}}$

First, an extrinsic definition.Consider the function $$ C:\bR^N\times \bR^N\to\bR,\;\; C(\bp,\bq)=(\bp,\bq), $$ where $(-,-)$ is the canonical inner product in $\bR^N$. Fix a point $\bp_0\in \Sigma$ and normal coordinates $(x^1,x^2)$ on a neighborhood $U$ of $\bp_0$ in $\Sigma$. The restriction of $C$ to $U\times U$ can be viewed as a function of the four variables $(x^1,x^2; y^1, y^2)$. Then the Gaussian curvature $K(\bp_0)$ of $\Sigma$ at $\bp_0$ is given by

$$ K(\bp_0)=\Big(\partial^4_{x^1x^2y^1y^2}K(x,y)-\partial^4_{x^1x^1y^2y^2}K(x,y)\;\Big)\big|_{x=y=0} $$ This follows from Theorema Egregium.

Here is an intrinsic definition. For a geodesic triangle $\Delta\subset $ we denote by $\theta(\Delta)$ the sum of its angles. In the Euclidean case $\theta(\Delta)=\pi$ but, in the presence of curvature, the defect $$ d(\Delta):=\theta(\Delta)-\pi $$ can be nonzero. Then $$ K(\bp_0)=\lim_{\Delta\to\bp_0}\frac{d(\Delta)}{\mathrm{area}(\Delta)}, $$ where the limit is taken over geodesic triangles collapsi on $\bp_0$. This follows from the (local) Gauss-Bonnet theorem.

In the simplest case when $\Sigma$ is a round sphere of radius one it can be shown elementarily that for any geodesic triangle we have $d(\Delta)=\mathrm{area}(\Delta)$. This is an older result of Legendre that predates Gauss-Bonnet.

$\endgroup$
1
$\begingroup$

I wrote a short note that proves the Theorem Egregium for a hypersurface embedded in $\mathbb{R}^n$. The calculation is, of course, much simpler when $n=2$. In fact, it requires no a priori definition of Gauss or Riemann curvature. That and the intrinsic nature of the definitions fall out of the calculation. And, as a corollary, one gets the intrinsic definition of Gauss or Riemann curvature.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.