## What is the definition of “canonical” ?

I just received a referee report critizing that I would too often use the word "canonical". I have a certain understanding of what "canonical" should stand for, but the report shows me that other people might think differently. So I am asking:

1. Is there a definition of "canonical"?

2. What are examples where the use of "canonical" is undoubtedly correct?

3. What are examples where the use of "canonical" is undoubtedly incorrect?

-
Nice question but the math police will probably close it down. I don't think there is a canonical definition of 'canonical'. – Idoneal Mar 28 2010 at 18:35
I think this question is fine, because: it admits answers where the respondent can bring external knowledge to bear; it is based on a particular point of interest and importance to practising mathematicians, esp. those in early stages of their careers; and there is some sense of consensus/tradition, so that something like a "right" or "wrong" answer could be attempted. – Yemon Choi Mar 28 2010 at 18:43
I think this question is a great example of how bringing in context can make a question less likely to be closed. Without the comment about the referee report, I probably would have thought the OP was being a wag, but in that context the question makes a lot of sense. – Ben Webster Mar 28 2010 at 19:26

## 15 Answers

1. Not a definition, exactly; I would say the situation is similar to that of forgetful functor. If I say there is a canonical isomorphism between X and Y, then what I mean is that if asked, pretty much everyone would choose the same isomorphism. A canonical isomorphism is very often a natural isomorphism in the sense of category theory, but the converse need not hold. A canonical isomorphism does not need to be the unique isomorphism between X and Y, though sometimes it is when X and Y are considered as equipped with some additional structure.

2. "There is a canonical isomorphism between the set of elements of a ring R and the set of ring maps $\mathbb{Z}[x] \to R$." Obviously, I mean for $r \in R$ to correspond to the ring map sending $x$ to $r$, although I could just as well send $x$ to $-r$.

3. "There is a canonical isomorphism between a finite-dimensional vector space V and its dual." No explanation needed, I suppose.

Maybe more interesting would be an example where the word "canonical" is arguably correct or incorrect; I can't think of one off-hand.

Addendum, after reading some of the other answers: I would emphasize that for me there is a difference between "natural" in the formal category-theoretic sense and "canonical". For one thing there is a linguistic distinction: if I am considering an isomorphism F between X and Y then "Theorem: F is a natural isomorphism" is perfectly acceptable but "Theorem: F is a canonical isomorphism" is very strange to me. There should be only one canonical isomorphism between two things, though what that isomorphism is could depend on context, e.g., "the canonical isomorphism $A \otimes B \to B \otimes A$" where $A$ and $B$ are graded abelian groups might mean different things to an algebraic geometer and an algebraic topologist.

Finally, this is hardly a definition, more of a rule of thumb: there is a canonical isomorphism between X and Y if and only if you would feel comfortable writing "X = Y".

-
3. bothers me. Don't you want it to say "...and the dual of the dual," so the statement is correct? – AndrewLMarshall Mar 28 2010 at 18:45
The OP asked for an incorrect use of the word "canonical", which I took to mean a false statement which becomes true if "canonical" is removed. – Reid Barton Mar 28 2010 at 18:46
+1 for the rule of thumb. I think this is a very good litmus test. – François G. Dorais Mar 28 2010 at 20:13
>but the converse need not hold. Could you please give an example for this statement? – Dmitri Pavlov Mar 28 2010 at 20:28
Sure, for example, the natural isomorphism $V \to V^{**}$ given by $x \mapsto (f \mapsto 3f(x))$. – Reid Barton Mar 28 2010 at 20:34
show 4 more comments

For me the word “canonical” always means “functorial in some sense”, usually without using any form of the axiom of choice. For example, every finite-dimensional vector space is canonically isomorphic to its double dual, because there is an isomorphism of functors id → **, but there is no canonical isomorphism between a finite-dimensional vector space and its dual, because one cannot construct an isomorphism of functors id → * without using some form of the axiom of choice. Likewise, the construction of an algebraic closure is not canonical because there is no functor that sends a field to its algebraic closure, even though every two algebraic closures are (non-canonically) isomorphic.

I presume that one can allow using the axiom of choice and still get the same results, but in this case one needs to use the language of 2-categories. For every well-pointed elementary topos T (basically, a set theory), we can construct the category of finite-dimensional vector spaces in this topos and isomorphism of functors id → **. I think that this isomorphism depends 2-functorially on T. On the other hand, even if we use the axiom of choice to construct an isomorphism of functors id → * for every well-pointed elementary topos T, there is no way to make it depend functorially on T. I must say that I have never tried to prove any of these statements, so they might as well be totally wrong.

-
Your usage of "axiom of choice" is wrong -- the fact that a finite-dimensional vector space is isomorphic to its dual is provable without any use of the axiom of choice (even in topoi if you use the correct definition of finite). What you meant is probably "without making arbitrary choices" or "by making uniform choices." (The latter is how I usually understand the phrase "canonical choice.") – François G. Dorais Mar 28 2010 at 19:04
To construct an isomorphism between the identity functor and the dual functor in the category of finite-dimensional vector spaces, isn't it necessary to choose, for each vector space, an explicit isomorphism to its dual? I think that's what Dmitri means. – Qiaochu Yuan Mar 28 2010 at 19:10
Qiaochu is right. I only said that “one cannot construct an isomorphism of functors id → * without using some form of the axiom of choice”, not that one cannot construct an isomorphism between a finite-dimensional vector space and its dual without using some form of the axiom of choice. – Dmitri Pavlov Mar 28 2010 at 19:17
@Dmitri: Yes, and your usage is correct, I apologize for the confusion. I'm leaving my comment there to since there is apparently a way to misunderstand what you wrote. (Though, after rereading carefully once more, I don't think what you wrote is ambiguous in any way. My guess is that accidentally skipping over a few words changes the meaning.) – François G. Dorais Mar 28 2010 at 19:43
@Konrad: For me natural = functorial = canonical. In particular, the natural isomorphism V → V** given by x ↦ (f ↦ -f(x)) is a canonical isomorphism for me, even though Reid Barton claims that it isn't. (I replaced 3 by -1 in his example to avoid problems with characteristic 3.) In my papers I avoid the term “canonical” and use more precise words such as “functorial” instead. – Dmitri Pavlov Mar 28 2010 at 21:06
show 6 more comments

I would say that "canonical" ought to be used to describe when no choices have been made.

A nice example of a non-canonical identification: A principle bundle is made up of principle homogeneous spaces for the action of a Lie group. These are spaces which are homeomorphic but non-canonically isomorphic to the Lie group. For example, I might have a circle bundle. My Lie group would be a concrete version' of the group such as ${|z| = 1}$, but my fibres are simply circles. I would need to choose a base point on each of the circles to make them into groups in the same way. This amounts to taking a global section and can't always be done (e.g. circle bundle on the sphere has no global section by hairy ball theorem), so the non-canonical-ness might actually be important

The labelling of identifications as Canonical and Non-canonical is common in linear algebra: Since one chooses bases so often, it is worth pointing out when such a choice is avoided...

To prove that $V^* \otimes V^*$ is isomorphic to $(V \otimes V)^*$, one ought to work with elements of the spaces directly rather than their representations in some basis. I would therefore call the resulting isomorphism canonical'.

-
 (I just fixed your latex in the last paragraph. When the equation uses * and a few other annoying things, you should surround the \$with backticks .) – François G. Dorais♦ Mar 28 2010 at 23:02 Or instead of * use \ast, to get$\ast$– David Roberts Jun 5 at 2:06 I think there is a multi-level classification associated to "canonicalness," which explains why some clashes of definition occur. • Arbitrary — No requirements. • Uniform — There may be a few options but these options can be selected by making a few global choices. • Canonical — As in the uniform case, but there is only one natural choice of options which applies globally. Canonical examples à la Russell: • Choose one sock from each pair in a collection of sock pairs — There is no way to make a uniform choice. • Choose one shoe from each pair in a collection of shoe pairs — There are two obvious global solutions, left shoe or right shoe, but no way to prefer one over the other. • Choose one object from each set in a collection of sets each consisting of a bowtie and possibly other items — There is only one obvious global solution. I think the main point of contention is distinguishing uniform and canonical. Some will argue that it's not canonical if there is a choice to be made, while some will argue that a finite number of global choices is still canonical. There is yet another use of canonical to mean something like 'universally sanctioned' (this is closer to the religious term). The second occurrence of canonical above is of this type. - @François: In my example about ring homomorphisms Z[x] -> R I think there are two global solutions, but one seems clearly better than the other. Would you consider this "uniform" or "canonical"? – Reid Barton Mar 28 2010 at 20:00 @Reid: I'm not very fond of the distinction and I usually prefer the term uniform. That said, I think$x \mapsto r$is arguably more natural than$x \mapsto -r$. – François G. Dorais Mar 28 2010 at 20:04 @Reid: I think the distinction is that Z[x] implicitly comes equipped with a pointer to the generator x. Or I guess one can define Z[x] by the fact that it represents the forgetful functor from Ring to Set, and then I imagine that the two functors given by sending x to r and x to -r are naturally isomorphic, so the issue is moot. – Qiaochu Yuan Mar 28 2010 at 20:37 @Kevin: There are more than two choices for Hom(Z[x],R) = R, viz. x, -x, 1+x, 1-x,... all generate Z[x]. They are all equivalent, but I wouldn't say that they are all canonical. – François G. Dorais Mar 28 2010 at 21:59 Yeah, I was wrong about there being only two, but the point remains. – Reid Barton Mar 28 2010 at 22:05 show 4 more comments I always had the following working definition of canonical (which I think Gordon James told me and he might have said it was due to Conway? Not sure): a map A->B is canonical if you construct a candidate, and the guy in the office next to you constructs a candidate, and you end up with the same map twice. Somehow there is something more to it than that though. For example if A is an abelian group and we want a map A-->A then I will choose the identity, but I know for sure that the wag in the office next door to me will choose the map sending a to -a because that's his sense of humour. What has happened here is that there are in fact two canonical maps A-->A. This issue shows up in class field theory, which is an isomorphism between two rather fancy abelian groups X and Y, and where no-one could decide for a long time which one of the two canonical isomorphisms was "best". So you often see statements in number theory papers saying "we normalise our class field theory isomorphisms so that geometric Frobenii go to uniformisers" (the alternative being the inverse of this). It also shows up in the Weil pairing on an elliptic curve: it's canonical, but because we're in an abelian situation, its inverse is too. So you see in e.g. Katz-Mazur an explicit spelling out of which of the two canonical choices one is going to make (and hang all the non-canonical ones!). - I like the working definition, but I can't trust my neighbors with that kind of responsibility. To paraphrase something I hear very often from one of my colleagues: "You mean a (blah) that would occur in real mathematics, not any (blah) that I would come up with." – François G. Dorais Mar 28 2010 at 20:40 @Francois: somehow it's worse than that with the class field theory isomorphism. It's not that you can't trust your neighbour---there really is a 50-50 chance with that one. But somehow what saves us is that it's not that there's one canonical pair of maps, there really are two canonical maps, so if you were to confer beforehand then you'd both get the same map, whereas however much conferring you did, if you were presented with two abstract 1-dimensional real vector spaces where you couldn't see anything at all but fog, you'd never both manage to choose the same basis. – Kevin Buzzard Mar 28 2010 at 20:52 Please tell me people do not use the plural Frobenii! – Mariano Suárez-Alvarez Mar 28 2010 at 23:34 I've heard it too. I've even heard the verb "Frobenate" for applying the Frobenius map to something. – Tyler Lawson Mar 29 2010 at 4:16 I once saw the misspelling "Frobenious", followed by someone's suggestion that this was the adjectival form. – Mark Meckes Mar 29 2010 at 13:00 show 6 more comments I was taught to think that there is a precise definition of "canonical" in differential topology, at least in the context of linear algebra constructions. A construction is canonical if it is a smooth functor. (There is a Wikipedia page about smooth functors but it is not very insightful). And since it is hard to invent a non-smooth functor, it practically boils down to just being a functor. The categories involved are usually not mentioned explicitly, and they are not things like vectors spaces with linear maps. They are rather things like vector spaces with linear isomorphisms as morphisms. Or, more generally, isomorphisms of whatever structure you happen to have on them. For example, dual vector space is a canonical construction but an isomorphism between a vector space and its dual is not. On the other hand, there is a canonical one if your spaces carry Euclidean structure. The idea is that a canonical construction can be applied fiber-wise in fiber bundles. Sometimes this feature is advertised as a poor man's definition of "canonical" but this is not quite correct: for example, every vector bundle (over a paracompact base) is isomorphic to its dual, but this is not really canonical. - The observation that "canonical constructions" can be applied fiber-wise to bundles is an excellent one. I now realize that in practice, this perspective underlies a lot of my use of "canonical". – Tom Church Mar 28 2010 at 22:49 This seems to be the same as the use at this nlab page: ncatlab.org/nlab/show/canonical+morphism – Reid Barton Mar 29 2010 at 0:42 It is not the same that what I wrote, but maybe it is more correct. Although I don't see how it covers cases like "canonical orientation on$X\times X$". – Sergei Ivanov Mar 29 2010 at 2:58 I was always under the impression that canonical meant, precisely, that no arbitrary choices were necessary. But, that it was occasionally used less formally, in a more standard-English sort of way to mean traditional/obvious/well known. The informal meaning is usually used as a cheap way to avoid explaining something that's easier for the reader to guess anyway. Ex 1: Two vector spaces of the same dimension are isomorphic. The isomorphism is not canonical. Ex 2: A finite dimensional vector space is canonically isomorphic to its double dual. Ex 3: Let$\pi: S^3 \to S^2$be the canonical fibration. I never really liked it when people use canonical as in example 3. It seems like using it this flexibly detracts from the useful technical interpretation of the word. I've also heard some more complicated category theoretic interpretations of what canonical meant. But, after more scrutiny, it seems that these "definitions" are specific cases of the "no arbitrary choices" principle. - I would never call the Hopf fibration canonical, but maybe that's just me. – Deane Yang Mar 28 2010 at 21:51 The third sense is using "canonical" to mean "that which is found in canon," e.g. the literature. I think "standard" or "classical" would work better. Or "Hopf." – Qiaochu Yuan Mar 28 2010 at 23:41 I wouldn't call the Hopf fibration "canonical" either. But it used exactly that way, and it does fit the standard English definition of the word. If I was writing, I would definitely use something like "classical" instead. – Fabrizio Polo Mar 29 2010 at 6:23 IF I had a shiny 4D brain, I'd probably call the Hopf fibration "canonical". – horse with no name Feb 16 at 15:03 Not a definition, but an example of use in logic: In model theory, "canonical" is often used in the phrase "the canonical model" to mean "intended structure." For instance, in first-order logic, one may speak of "the canonical model of Peano Arithmetic" to mean the structure of the natural numbers, or "the canonical model of the theory of real-closed fields" to mean the field of real numbers. Intuitively, "the canonical model" of a theory is the structure one was trying to pin down when the axiomatisation of the theory was written. It's just that in first-order logic, it is hard to pin down (infinite) structures! No first-order theories admitting infinite models are categorical (they admit non-isomorphic models; indeed, they admit models of every infinite cardinality), and compactness/ultraproduct/(many other) constructions can often be used to build "non-standard" models of theories. "Non-standard" models of Peano Arithmetic or the theory of real-closed fields would in this context be called "non-canonical" (even though there are many canonically studied "non-standard" models of those theories!). But, many commonly studied theories do not have a notion of "canonical model." For instance, one would not say "the canonical model of group theory." - I probably just never noticed, but I don't recall seeing 'canonical' used instead of 'standard' in this context. Can you point to an example? – François G. Dorais Mar 28 2010 at 22:16 I do think you're right that 'standard' is used more often. But, a few examples: <p> - Peano Arithmetic (p 18): arxiv.org/pdf/0905.1680 <br> - model theory of geometry: people.maths.ox.ac.uk/zilber/q_tori.pdf <br> - modal logic (questioning just how 'canonical' a certain model is!): ideas.repec.org/a/spr/jogath/… <p> If I remember correctly, Hodges' model theory texts also use 'canonical' regularly to mean 'intended' or 'standard.' – Grant Olney Passmore Mar 28 2010 at 22:44 Thanks! Zilber's use of canonical is particularly interesting. – François G. Dorais Mar 28 2010 at 22:58 Hmmmmm, this seems slightly weird to me. I associate the term 'standard model' with the model that the theory was designed to describe. For example, the standard model of Peano arithmetic. In my head, 'canonical model' refers to the model constructed in the proof of the completeness theorem. I think this is pretty standard too (see Van Dalen, for instance). I'm sure it's standard in modal logic as well, I wrote my thesis on a method of constructing these kind of canonical models (see en.wikipedia.org/wiki/…). – Brendan Cordy Mar 29 2010 at 14:07 @Brendan Cordy: Great point. I've seen that use (in regards to Henkin constructions) quite a bit as well. I guess the moral of the story here is that the term "canonical model" is used in a number of different - even incompatible - ways! – Grant Olney Passmore Mar 29 2010 at 19:44 For me, if we have a partition P of a set S, then we can define a set of representatives, one from each part of P, each of which is called canonical. Typically, the partition P is formed by the orbits of a group G acting on S. If we choose G so that every element in S has a trivial stabiliser, then we can find |S| by instead counting the canonical representatives since |S|=|G|*|P| by the Orbit-Stabiliser Theorem. Often, the elements that are chosen to be canonical can be quite contrived - e.g. just because your program outputs a certain element of P first, i.e. "lexicographical order". To add some examples: a) An orthomorphism of$\mathbb{Z}_n$is a permutation$\sigma$such that$i \mapsto \sigma(i)-i \pmod n$is also a permutation. We partition the orthomorphisms of$\mathbb{Z}_n$into equivalence classes under the transformation$E_g$for which$E_g[\sigma](i)=\sigma(i)+g \pmod n$. Therefore the parts each have cardinality$n$and we define the canonical representatives to be the orthomorphisms$\sigma$for which$\sigma(0)=0$. Therefore the total number of orthomorphisms is$n$times the number of canonical orthomorphisms. b) A Latin square is an$n \times n$matrix containing$n$distinct symbols in which each symbol occurs exactly once in each row and each column. For instance, $$\begin{matrix} 1 & 3 & 2 \\ 3 & 2 & 1 \\ 2 & 1 & 3 \end{matrix}$$ is a$3 \times 3$Latin square. We can put it in a canonical form (which I call normalised) by permuting the columns so that the first row is in order, i.e. $$\begin{matrix} 1 & 2 & 3 \\ 3 & 1 & 2 \\ 2 & 3 & 1 \end{matrix}$$ Here the total number of Latin squares is$n!$times the number of normalised Latin squares. There's another canonical form (which I call reduced) which has the first row and first column in order. - Finding representatives for equivalence classes is often impossible to do canonically... I'm not really sure what sense you mean. – Qiaochu Yuan Mar 29 2010 at 5:12 Just take the map$i \mapsto j$where$j$is the canonical element in the part containing$i$. However, it's not always a pretty function. – Douglas S. Stones Mar 29 2010 at 12:39 chicken/egg: all based spaces have a canonical point, but there is no canonical way of picking a point in all (non-empty) spaces. The terminology:"picking a canonical point" should really be:"we give all the sets the structure of being based by picking a point in each - and hence forth may talk about the canonical point in each set". In short it is not a part of the structure to have a canonical point is a consequence of the structure. – Thomas Kragh Mar 31 2010 at 8:50 en.wikipedia.org/wiki/Canonical_form – Douglas S. Stones Apr 2 2010 at 13:01 Yes exactly. Here structures gives rise to canonical maps. E.g. the Normal$n$by$n$matrices over$\mathbb{C}$is sufficiently structured such that there is a canonical map to$\mathbb{C}^n$modulo the action of the symmetric group on the image, and this map classifies the matrices up similarity. So the canonical form is an equivalence class of diagonal matrices. I.e. for each matrix we get a canonical point in$\mathbb{C}^n$modulo the symmetric group action using the inherent structure of the space of normal matrices. – Thomas Kragh Apr 6 2010 at 11:03 Hopefully I don't say something too stupid. I just wonder whether the definition of canonical might be relative. For example, if we look at$ \mathbb Z / p$as an additive group in fact there is no non-zero element which stands out. But if we look at$ \mathbb Z / p$as a field$1$stands out as a non-zero element. Another example. From the geometrical reason alone, there is no good reason to choose a positive direction (Essentially there is no way to distinguish from left hand and right hand). But in a universe where there is electro magnetic force, we then have a canonical way to choose a positive direction. Yet another example, there is a canonical way to choose whether you want a left shoe or a right shoe: If you are left-handed then choose the left one, if you are right handed choose the right one. Perhaps what counts as canonical depends on where we are standing. A suggestion for a heuristic definition: canonical is definable with respect to the structure you are standing at. - Certainly. If you take the functorial point of view, everything depends on the ambient category. – Qiaochu Yuan Mar 29 2010 at 5:10 Tran Chieu Minh, this suggests the horrifying possibility of considering canonically canonical objects …. – L Spice Mar 29 2010 at 15:29 May be it is because I am not very familiar with the functorial point of view. But why canonical and functorial are the same is still not very clear to me. Canonical as I perceive is close in meaning to being naturally suggested. Functorial is however somesort of a commutative condition. Though in practice they often coincide but is there any conceptual gap? – Tran Chieu Minh Mar 29 2010 at 17:01 @ L Spice: Not quite sure what you mean. Are you saying that there should be no fixed meaning of being canonial? Or are you worrying about some type of self reference that might be paradoxical? – Tran Chieu Minh Mar 29 2010 at 17:04 Tran Chieu Minh, I was only joking. While I agree with the statement mathematically, the idea that canonicity is relative seems etymologically very funny. – L Spice Mar 29 2010 at 17:08 show 2 more comments Vague definition of canonical: Let$X$and$Y$be collections (often sets) for which assumptions has been made (has been given structures and/or are related somehow). A function$f\colon X \to Y$is canonical if it is given by a rule using only the already given structure. This explains the relation to the greek word rule (kanon). The precise meaning of the above are open for enterpretation: how much structure can the rule itself contain (maybe this can be made precise)! This "definition" somewhat contradicts many of the other answers, which for some reason is under the impression that canonical implies unique (or almost unique), which in my point of view is very wrong since different rules may define different maps. E.g. if we let$X$be the objects in the category of abelian groups and$Y$the morphisms then the definitions makes all the group homomorphisms$A \to A$given by multiplication with an element in$\mathbb{Z}$canonical, which to me is not a problem. Usually when there is an especially simple rule it is often assumed without mentioning that this is the rule defining the function. E.g. most will understand the following:"there is a canonical endemorphism of any object in a category". This emphasizes the multiplication with 1 above as somehow speciel or "more canonical" than the rest. This is simply because the rule works in much greater generality and is shorter. Usually if a rule is very simple the function will have nice properties. E.g. simply rules in category theory often define functors, natural transformations, e.t.c. This leeds many people to confuse the notion of canonical with "something behaving nicely". I am somewhat puzzled by the use of the word uniform in one of the answers. The nature of the word uniform is "of the same form" and relates more to symmetries and things looking the same every where. This often leeds to canonical maps, since a choice at one point can sometimes be extended to a choice at every point. Please someone comment on this since maybe this is just a use of the word I have not seen before! -  I think I share some of your concerns. – Tran Chieu Minh Mar 29 2010 at 17:18 On page vii of the Introduction to the 1996 edition of Sheaf Theory by Glen E. Bredon, the author discusses the difference between "canonical" and "natural" and points to a historical context: Occasionally, we use the equal sign to mean a "canonical" isomorphism, perhaps not, strictly speaking, an equality. The word "canonical" is often used for the concept for which the word "natural" was used before category theory gave that word a precise meaning. That is, "canonical" certainly means natural when the latter has meaning, but it means more: that which might be termed "God-given." We shall make no attempt to define that concept precisely. (Thanks to Dennis Sullivan for a theological discussion in 1969.) - It is not an answer but it must have to do with the way our brain pick up a sample between a few ones. It must be the minimum of some function which can be implemented for real in the brain. I do not believe that there is a pure logical definition of "canonical" independently of the way our brain works. Experience : give me a number? What do you answer? 0 or 1 rarely$\pi$or even 115674. The numbers 0 and 1 are canonical in some sense. Give me a basis of${\bf R}^3$. The same holds$((1,0,0),(0,1,0),(0,0,1))$I minimize the number of different digits and I pick them in my "basis" of canonical numbers. Well, interesting question. What is the canonical circle ? Ce circle in${\bf R}^2$, centered at$(0,0)$with radius$1$. I know two numbers$0$and$1$, the radius cannot be$0$because it is not a (true) circle, so the radius is$1$, now the center could be$(0,0)$,$(0,1)$,$(1,0)$or$(1,1)$? I prefer$(0,0)$,$0$is simpler than$1$. How do you fit this example with category arguments? BTW I have nothing against category theory, I like it. But I'm curious to see if this example fits general categorical arguments. - Regarding the (widely considered to be false) statement that "There is a canonical isomorphism between a finite-dimensional vector space V and its dual" in Reid Barton's answer, I think that the situation is a bit more interesting than that. It is a good illustration of the idea that an object may be defined to be "canonical" if it is constructed without making any choices, and the interesting point here is that there are various degrees of (in-)tolerance to choices. If we work with vector spaces of fixed finite dimension, then an isomorphism $i_E:E\to E^*$ between a vector space $E$ and its dual $E^*$ may be called canonical if 1. it does not depend on the choice of a basis for $E$ but we need a basis to define it, or 2. it does not depend on the choice of a basis and may be defined without choosing a basis, or 3. it does not depend on basis choices as above and does not even depend on $E$, in the sense that whenever $u:E\to F$ is an isomorphism between dim. vector spaces of the same finite dimension, then$u^*\circ i_F\circ u=i_E$where$u^*$is the transpose of$u$. This third notion of canonicity is essentially functoriality. Concretely, given a basis $B=\{e_j\}$ of$E$with dual basis $B^*=\{e_j^*\}$, we can construct an isomorphism $i=i_{E,B}:E\to E^*$ that maps $e_j$ to $e_j^*$. This map does not depend on the choice of basis if and only if $u^*\circ i\circ u=i$ for all $u\in \text{GL}(E)$. It is easily seen that this is equivalent to the fact that $\text{GL}_n(k)=\text{O}_n(k)$, where$k$is the base field,$n$is the dimension, and $\text{O}_n(k)$ is the orthogonal group of the standard (sum of squares) quadratic form. Exercise: this equality holds if and only if$n=1$and$k$has at most$3$elements. Thus for$n=1$and $\text{card}(k)\leq 3$ the map $i_{E,B}:E\to E^*$ does not depend on$B$, so we may write it simply $i_E$. When $\text{card}(k)=2$ this is not so surprising because any two one-dimensional vector spaces over the field with two elements are uniquely (hence canonically in whichever sense you like) isomorphic, but for $\text{card}(k)=3$ this is a bit more exotic. Having reached this point, we might think that we are in the funny notion 1 of canonicity (and this is what I thought some minutes ago). But in fact, still assuming that$n=1$and $\text{card}(k)\leq 3$, we can exhibit an isomorphism $i:E\to E^*$ without any reference to a basis. Namely, define$i(0)=0$and if$x\in E$is nonzero, then it is a basis of$E$, and we can define$i(x)=x^*$, the only element of the dual basis. The point is that since$a^2=1$for all nonzero scalars in$k$, this map$i$is linear. Conclusion: if$n=1$and $\text{card}(k)\leq 3$ there is an isomorphism $i:E\to E^*$ that is constructed without a choice of basis, and it is functorial for isomorphisms of one-dimensional vector spaces. If$n\ge 2$or$\text{card}(k)\ge 4$, the map $i_{E,B}:E\to E^*$ is not independent of the basis $B$. I would guess that it is possible to find examples of phenomena like 1 above. -  Here is an example I learned in Rennes, and which, I believe, originates from Bas Edixhoven. If$k$is the field with two elements and$E$has dimension$2$, then there is a unique alternate form on$E$, which gives rise to a canonical isomorphism between$E$and$E^*$. – ACL Feb 16 at 14:52 You are right that the last-but-one sentence "there is no such basis-choice-free isomorphism" is not true and must be replaced by "the map $i_{E,B}:E\to E^*$` above is not independent of the basis. – Matthieu Romagny Feb 16 at 17:16 I have two competing interpretations of the word canonical. One, apparently the one used by Bourbaki, is mathematically informal. In various contexts, some objects (maps, modules, etc.) are defined unambiguously and called canonical. For example, the canonical basis of the free module$A^{(I)}$over a set$I$, the canonical surjection from a set$X$to its set$X/R$of equivalence classes with respect to some equivalence relation$R$, the canonical bilinear map from a product of two modules to their tensor product, etc. The other interpretation is categorical. The given context defines (often implicitly) some categories and the canonical object is functorial with respect to isomorphisms. It is more or less what Kevin Buzzard says in its answer, when he defines canonical by the property that he and a colleague, when asked to define the object, would agree on the same object. -  Dear Antoine, how do you apply this categorical interpretation to prove the following fact: there is no canonical generator for the multiplicative group of the field with$p$elements? – Matthieu Romagny Feb 16 at 19:50 Well (except when$p=2$), for every generator of the multiplicative group$\mathbf F_p^\times$, there is an automorphism of this group which moves the generator. But there is a canonical generator in the former sense: I would say that the one with smallest positive representative in$\mathbf Z$qualifies. – ACL Feb 16 at 23:48 OK, thanks! (Note: for$p=3$also, the generator is canonical.) – Matthieu Romagny Feb 17 at 13:02 If we are considering the category of fields with$p$elements, then the canonical generator$c$in Bourbaki's sense works also in the functorial sense since an isomorphism between two fields with$p$elements takes$c$to$c$. (Of course there is only one isomorphism, and it is used to identify$c$everywhere...) Maybe a more satisfying non-existence statement in the functorial sense of canonicity is that cyclic groups of order$n$do not have a canonical generator if$n\ge 3\$. – Matthieu Romagny Feb 17 at 13:30