## Sheaf cohomology and injective resolutions

In defining sheaf cohomology (say in Hartshorne), a common approach seems to be defining the cohomology functors as derived functors. Is there any conceptual reason for injective resolution to come into play? It is very confusing and awkward to me that why taking injective stuff into consideration would allow you to "extend" a left exact functor.

-

Since everybody else is throwing derived categories at you, let me take another approach and give a more lowbrow explanation of how you might have come up with the idea of using injectives. I'll take for granted that you want to associate to each object (sheaf) $F$ a bunch of abelian groups $H^i(F)$ with $H^0(F)=\Gamma(F)$, and that you want a short exact sequence of objects to yield a long exact sequence in cohomology.

I also want one more assumption, which I hope you find reasonable: if $F$ is an object such that for any short exact sequence $0\to F\to G\to H\to 0$ the sequence $0\to \Gamma(F)\to \Gamma(G)\to \Gamma(H)\to 0$ is exact, then $H^{i}(F)=0$ for $i>0$. This roughly says that $H^{i}$ is zero unless it's forced to be non-zero by a long exact sequence (you might be able to run this argument only using this for $i=1$, but I'm not sure). Note that this implies that injective objects have trivial $H^{i}$ since any short exact sequence with $F$ injective splits.

Now suppose I come across an object $F$ that I'd like to compute the cohomology of. I already know that $H^{0}(F)=\Gamma(F)$, but how can I compute any higher cohomology groups? I can embed $F$ into an injective object $I^{0}$, giving me the exact sequence $0\to F\to I^{0}\to K^{1}\to 0$. The long exact sequence in cohomology gives me the exact sequence $$0\to \Gamma(F)\to \Gamma(I^{0})\to \Gamma(K^{1})\to H^{1}(F)\to 0 = H^1(I^{0})$$

That's pretty good; it tells us that $H^{1}(F)= \Gamma(K^{1})/\mathrm{im}(\Gamma(I^{0}))$, so we've computed $H^{1}(F)$ using only global sections of some other sheaves. We'll come back to this, but let's make some other observations first.

The other thing you learn from the long exact sequence associated to the short exact sequence $0\to F\to I^{0}\to K^{1}\to 0$ is that for $i>0$, you have $$H^{i}(I^{0}) = 0\to H^{i}(K^{1})\to H^{i+1}(F)\to 0 = H^{i+1}(I^{0})$$

This is great! It tells you that $H^{i+1}(F)=H^{i}(K^{1})$. So if you've already figured out how to compute $i$-th cohomology groups, you can compute $(i+1)$-th cohomology groups! So we can proceed by induction to calculate all the cohomology groups of $F$.

Concretely, to compute $H^{2}(F)$, you'd have to compute $H^{1}(K^{1})$. How do you do that? You choose an embedding into an injective object $I^{1}$ and consider the long exact sequence associated to the short exact sequence $0\to K^{1}\to I^{1}\to K^{2}\to 0$ and repeat the argument in the third paragraph.

Notice that when you proceed inductively, you construct the injective resolution $$0\to F\to I^{0}\to I^{1}\to I^{2}\to\cdots$$ so that the cokernel of the map $I^{i-1}\to I^{i}$ (which is equal to the kernel of the map $I^{i}\to I^{i+1}$) is $K^{i}$. If you like, you can define $K^{0}=F$. Now by induction you get that $$H^{i}(F) = H^{i-1}(K^{1}) = H^{i-2}(K^{2}) = \cdots = H^{1}(K^{i-1}) = \Gamma(K^{i})/\mathrm{im}(\Gamma(I^{i-1})).$$

Since $\Gamma$ is left exact and the sequence $0\to K^{i}\to I^{i}\to I^{i+1}$ is exact, you have that $\Gamma(K^{i})$ is equal to the kernel of the map $\Gamma(I^{i})\to \Gamma(I^{i+1})$. That is, we've shown that $$H^{i}(F) = \ker[\Gamma(I^{i})\to \Gamma(I^{i+1})]/\mathrm{im}[\Gamma(I^{i-1})\to \Gamma(I^{i})].$$

Whew! That was kind of long, but we've shown that if you make a few reasonable assumptions, some easy observations, and then follow your nose, you come up with injective resolutions as a way to compute cohomology.

-
It is probably worth making explicit that this same argument shows why you can use acyclics for the given functor you are interested in to resolve by and compute derived functors. The splitting property of injectives just ensures that they are suitable for any left exact additive functor. – Greg Stevenson Oct 19 2009 at 7:02
I'd also like to mention that the reader interested in following this line of thought might read Cartan and Eilenberg's book, which studies homological algebra from pretty basic principles. – Tyler Lawson Oct 19 2009 at 12:53
This exact development is found in Gunter Harder's book "Lectures on Algebraic Geometry 1". It is also implicit in Hartshorne's treatment but I never knew that "universal delta functors" were as simple as this before reading through Harder's book. I have no idea why this line of thought is not usually presented upfront in presentation of derived functors (Ideally AFTER you have gotten a feeling for some cohomology with your bare hands, such as building $H^1$ from the ground up in group cohomology). Too many people seem content to use the definition without any motivation... – Steven Gubkin Jun 9 2010 at 13:41

Even though I'm far from a historian, it seems to me the initial reason for considering injectives is

-prior to derived categories;

-but comes later than the task of extending left exact functors.

For the latter, in particular, there are apparently many ways of doing it. But:

injective resolutions are almost ideal for comparing different definitions of cohomology.

It is important to note that cohomology was around before injective resolutions, appropriate to different situations, and then the question came up of comparing several of them when they all made sense. As a concrete example, you might consider Cech and De Rham cohomology on a smooth manifold, both with real coefficients. It's also obvious that cohomology was not initially thought of in terms of the failure of exactness, which, in any case, can be good or bad depending on the situation.

Typically, you have two complexes A and O with rather different constitutions. How do we then compare their cohomology? The standard method is to find a third one C that admits natural maps A->C and O->C. Then we proceed to show that both of these induce isomorphisms on cohomology. A very basic form of this argument occurs even when showing that the cohomology computed using triangulations is independent of the triangulation. There, C is the complex associated to a common refinement.

Even in other situations, it makes sense to consider C as a 'common refinement' of some sort. The point then, is that an injective complex gives an ultimate common refinement in a wide variety of situations. This is because injectives, by their very definition, receive maps (more precisely, map extensions) very easily, so that you don't need to cook up a separate C for each pair of A and O. Once the injective definition is around, the different comparisons can be made in one fell stroke with the theorem that all acyclic resolutions compute the same cohomology as the injective one. Of course, `acyclicity' here can only be defined in terms of the fixed definition using injectives, and checking for it can be tricky and situation-dependent. For example, checking that the Cech resolution is acyclic on a variety requires that the covering consist of affines, and then knowledge of some property of affines. Checking that the smooth differential forms on a manifold form an acyclic requires some technicalities on partitions of unity and extensions of C-infinity functions, and so on. (Of course such verification processes are routine, once you're used to them. But whenever they are examined afresh, they always strike me as quite technical in interesting ways.) In the end, however, it's clear that this approach brings considerable conceptual unity to the ubiquitous problem of comparing cohomology. It's my best guess at the real initial motivation behind the definition.

You might even say that the definition of an injective object incarnates purely wishful thinking with regard to the problem of comparisons. What could be more naive than thinking there is one thing that frees you at once from all future specific consideration of C? The deep insight is that objects realizing such wishful thinking do exist often enough in nature. If I may add a bit of philosophical reflection, the definition of injectives illustrates quite well the sense of child-like innocence that Grothendieck regarded as fundamental to his mathematical nature. Several people have commented on the meaning of Grothendieck's self-evaluation, especially in view of the apparent sophistication of the resultant technology. It is interesting to identify the precise mathematical locus of such innocence, if only to gain some sense of when innocence is likely to yield fruit.

-
I particularly like this line: "it's clear that this approach brings considerable conceptual unity to the ubiquitous problem of comparing cohomology." – David Zureick-Brown Oct 19 2009 at 18:08
it's a wonderful answer! regarding the final paragraph, what do you mean by the "resultant technology"? do you mean "resulting technology"? Or is there some technology about the resultant?? – natura Apr 3 2010 at 1:13
I'm glad you liked it. I just meant 'resulting technology.' – Minhyong Kim Apr 5 2010 at 9:31
"It is interesting to identify the precise mathematical locus of such innocence, if only to gain some sense of when innocence is likely to yield fruit." This is a very nice sentence - I think innocence bearing fruit is one of more satisfying feelings of math. – Peter Samuelson Sep 23 at 6:25

Here is a funny aspect of the story:

When learning (co)homology one usually encounters first projective resolutions, projective objects are better to imagine in most people's opinion. But in sheaf categories there tend to be few projectives for two reasons:

In usual cohomology for modules, the projectivity is a requirement on the module structure only; set theoretically the map required in the definition of "projective" always exists. This requirement on module structure has of course to be met for sheaves of modules as well.

But secondly, even if you drop the requirement to be a homomorphism the map of sheaves does not need to exist: By definition of "projective" any epimorphism into a projective object has a section. For sets this is the statement of the Axiom of Choice ("every set is projective"). But in a sheaf category (which is a topos) the internal logic is in general intuitionistic, in particular the axiom of choice need not be valid and one can fail to find the section already on the level of sheaves of sets, even before looking for sections that are homomorphisms...

-

This is an interesting discussion to someone raised in the 60's. It illustrates how lack of motivation creeps into books unnoticed. Back when Hartshorne was being written everyone was steeped in the then standard derived functor formalism of Cartan Eilenberg and Grothendieck, axiomatizing constructions of cohomology via complexes. So the pattern of this formalism explained so nicely by Anton and Andrew above was taken for granted. As the subject evolved, it was understood that acyclic resolutions could replace the more categorically natural injective ones. This is the gist of Evan's answer. Perhaps also there is a tradition in mathematics books of giving definitions without historical background. I have always had difficulty with any unmotivated definitions, such as abstract "residues" and modern Riemann Roch theorems, so I keep stressing to my students the value of learning the original version of Riemann, even if their goal is to understand cohomological and arithmetic versions. Anyway, excellent question.

-

If you're willing to take for granted that (bounded-below) chain complexes and quasi-isomorphisms are good things to study, then left exact functors have the defect that they do not preserve quasi-isomorphisms between chain complexes. Derived functors are a way to correct this defect. The idea is that left exact functors do preserve quasi-isomorphisms between complexes of injective modules, and every complex is quasi-isomorphic to a complex of injectives. So whenever we want to apply a left exact functor to a complex, we should first replace the complex by a quasi-isomorphic complex of injectives--it doesn't matter which replacement we pick--and then apply our functor. This process goes by some name like the total right derived functor. In summary, derived functors are a way to force functors to preserve quasi-isomorphisms of chain complexes.

Often in homological algebra we start with a single object M rather than a complex, view it as a complex concentrated in degree 0, apply the right derived functor of F, and then take the ith cohomology group of the resulting complex--we write this as RFi(M).

There is a massive generalization of these ideas due to Quillen--the theory of model categories.

-

One conceptual reason is, in technical terms, that "the derived category of (bounded-below) complexes is isomorphic to the category of (bounded-below) injective complexes." In less fancy language:

First, when working with a single sheaf A, we can make it into a complex A with one A and everything else 0:

...→0→A→0→0→0→....

Then an "injective resolution" of A is really a complex of injectives I with a quasi-isomorphism A→I (a map of complexes which induces an isomorphism on cohomology).

Now, say A and B are any (bounded below) complexes of sheaves which have the same (cochain) cohomology. There may not be a map from one to the other giving rise to the isomorphism of their cohomologies (kernels mod image), i.e. a quasi-isomorphism (qis).

However, you can find complexes of injectives I and J, and maps a: A → I, b: B → J, and f: I → J such that a,b are qis, and f is a homotopy equivalence (in particular a qis). So, "as far as cohomology is concerned", you can replace A by I and B by J.

The "big picture" reason for this is that injectives are "flexible" in terms of extending maps into them (that's how they're defined), which is what allows the construction of the maps in the previous paragraph, and having maps between things is good, because maps transform nicely under the application of functors.

-

In my opinion, all answers go a little too far. In this (non-topological!) setting I think about this as follows: The aim is to analyze the lack of right-exactness of a left-exact functor $\Gamma:C \rightarrow D$ between abelian categories. One functorial notion that captures this inexactness is a delta-functor $H = \lbrace H^n, n \in \mathbb{N}$ with $H^0 = \Gamma$. This is what I call a cohomology theory for $\Gamma$. Now, there may exist a lot of them, and so it makes sense to look for universal cohomology theories for $\Gamma$, where universal means, that given any delta functor $K = \lbrace K^n, n \in \mathbb{N} \rbrace$ (not necessarily with $K^0 = \Gamma$ !) and a morphism $f^0:H^0 \rightarrow K^0$ in degree zero, then there exists a unique extension of $f^0$ to a morphism $f:H \rightarrow K$ of delta-functors. Up to canonical isomorphism there exists only one universal cohomology theory for $\Gamma$ which is then called the right derivative of $\Gamma$. The question is of course if such a universal cohomology theory for $\Gamma$ exists. And here it comes: If the category $C$ has enough injectives, then $\Gamma$ has a right derivative which can be computed by injective resolutions. (You can confer Lang's Algebra book for all the above notions, it's actually pretty nice).

The universality condition forces a strong connection between $\Gamma$ and $H$. This allows you for example to extend constructions in degree 0 to arbitrary degree. An example from group cohomology: Let U be a subgroup of a group G and let $g \in G$. Then conjugation is an isomorphism of functors $(-)^U \rightarrow (-)^{gUg^{-1}}$, where $(-)^U$ is the U-invariant functor on G-modules. Now, $H^n(U,-)$ is a universal cohomology theory for $(-)^U$ and $H^n(gUg^{-1},-)$ is a universal cohomology theory for $(-)^{gUg^{-1}}$. Hence, the exists a unique isomorphism of delta-functors $H^n(U,-) \rightarrow H^n(gUg^{-1},-)$ and in this way we have extended the conjugation to all cohomology groups. This is very inexplicit of course, but this is a powerful property for more advanced constructions. And verifying each time that constructions are compatible with the deltas is not a nice job (normally people simply say, it works).

In Lang's book "Topics in the Cohomology of Groups" you will find a lot more of such arguments.

If you now want to get rid of all choices, you can move to the derived category.

Hope this helps.

-
Sorry if this question sounds stupid, but why is universal object good/special? In some very concrete cases, like free groups or tensor products, it is very clear to me why the universal properties in those cases are of interest. However in the situation of delta functors, I don't even know why we should care about the universal property of unique extension of degree 0 morphism. – Ho Chung Siu Oct 19 2009 at 9:25
Not a stupid question! I have edited my above post. – S1 Oct 19 2009 at 11:45
This answer is the same as Anton's, just with more machinery under the hood. In particular if you spell out what a delta functor is, what it means for one to be universal, and why injective resolutions give you one, you will have Anton's answer. – Steven Gubkin Jun 9 2010 at 13:46

The reasons injective (and dually, projective) resolutions are important in the construction of derived functor cohomology are primarily technical in nature. You can think of an injective resolution as a "nice" replacement for an object (or more generally, for a chain complex) in the homotopy category of chain complexes in the same way that we think of a CW complex as a "nice" homotopical replacement for an arbitrary topological space. A very important feature is that these replacements are functorial in the homotopy category. In other words, the resolutions are unique up to chain homotopy equivalence, and given a map between two objects, this map extends to a map between their injective resolutions uniquely (again up to chain homotopy).

However, once you actually show the existence of a good notion of derived functor, you can actually use more broad classes of resolutions for computations. It's generally fairly impractical to take injective or projective resolutions. Instead of injective sheaves, one can take resolutions of acyclic objects, which are objects that themselves have no higher cohomology. There are various classes of acyclic sheaves that are often used in various contexts, such as soft sheaves, flasque (or flabby) sheaves, soft sheaves, and fine sheaves. Finding some sort of acyclic resolution is often much easier than finding an injective resolution, so understanding when various types of sheaves are acyclic is very useful.

-