15
$\begingroup$

Do there exist any mirrors $M$ in $d$-dimensional Euclidean space $\mathbb{R}^d$ for which there exist three different points $x_1$, $x_2$, $x_3 \in \mathbb{R}^d$ such that if any ray of light passes through one of the points $x_i$ it automatically passes through the other two after a number of reflections on $M$?

The question needs some formalisation for what is meant by $M \subset \mathbb{R}^d$ and “rays of light”, although it is easy to guess what they should be:

  • $M$ is a $(d-1)$-dimensional differentiable submanifold of $\mathbb{R}^d$.

  • A ray of light is a continuous function $g:\mathbb{R} \rightarrow \mathbb{R}^d$ for which $g^{-1}(g(\mathbb{R}) \cap M)$ is a discrete set. Moreover, $g$ is locally smooth, linear and unit speed at any point $t\in \mathbb{R}$ for which $g(t) \notin M$: $\left\|g'(t)\right\|=1$ and g''(t)=0. At any point $t^* \in \mathbb{R}$ for which $g(t^*)\in M$ we require $g$ to satisfy the reflection law: denoting $a=\lim_{t \to t^* -} g'(t)$ and $b = \lim_{t \to t^* +} g'(t)$ \begin{equation} b + a \perp n(g(t)) \end{equation} and \begin{equation} b - a \propto n(g(t)) \end{equation} (n is a local unit-normal vector field on $M$).

$\endgroup$
6
  • 3
    $\begingroup$ If you'd be happy to settle not for all rays of light, but for a set of positive measure, then it's easy even in two dimensions: simply arrange a curve into a triangular shape using three pieces of ellipse: one piece with each pair of points as focus. $\endgroup$ Mar 30, 2015 at 11:58
  • $\begingroup$ That's what I had in mind. But I'm concerned by what happens with rays that go from one focus to a point of intersection. Even if we can persuade it to be differentiable, I can't see how to get it to visit the other two foci. Admittedly, this is a bit more than positive measure: it may only fail on a set of zero measure. $\endgroup$ Mar 30, 2015 at 12:58
  • $\begingroup$ That's a nice comment, and applying your construction procedure in a careful (but obvious) way, I think we can assert that all light rays except those hitting an edge (i.e. a point where two elliptic pieces meet) prematurely, will pass over all three foci. $\endgroup$
    – 5th decile
    Mar 30, 2015 at 12:58
  • $\begingroup$ Ah, I think your edited comment arrived about the same time as my reply, and we were both thinking the same thing! $\endgroup$ Mar 30, 2015 at 12:58
  • 1
    $\begingroup$ Sorry, my original comment was too long. This construction seems also very specific to 2 dimensions (and in that sense I don't see why you say that it's easy even in 2 dimensions. It seems to make it easy only in 2 dimensions. Ok, by glueing together pieces of ellipsoid in higher dimensions in a nice way we can probably produce shapes where the "good" light rays have positive measure, yet because we can not glue those pieces together along the "lines of d-2-dimensional submanifolds" the "bad" light rays seem to have positive measure as well (generically). Right?) $\endgroup$
    – 5th decile
    Mar 30, 2015 at 13:05

2 Answers 2

13
$\begingroup$

Here is a way that works for a set of full measure in any dimension, for any number of points, not just $3$. We can construct it for dimension $2$, then rotate it about the $x$-axis.

Let the points be $x_i=(i,0)$ for $i=1,...,n$. Attach semi-ellipses $\gamma_i$ whose major axes and end points are along the $x$-axis whose foci are $x_i,x_{i+1}$ so that for $i$ odd we take the intersection of the ellipse with the upper half plane, and for $i$ even we take the intersection with the lower half plane. Extend this by adding semicircles $\gamma_0$ and $\gamma_n$ about the end points. If we choose the semiellipses so that the total distance to $x_i$ and $x_{i+1}$ is $2$, and use semicircles with radius $1/2$, this is even a simple closed curve, although there are points where it is not smooth.

Light passing through $x_1$ going up bounces off $\gamma_1$ and is reflected to $x_2$ going down, so it reflects off $\gamma_2$ to $x_3$ going up, etc. After it passes through $x_n$ it bounces off $\gamma_n$ and reverses. Light passing through $x_1$ going down bounces off $\gamma_0$ and reverses through $x_1$, going up. The behavior of the horizontal ray through the nonsmooth points and all $x_i$ is not really defined, but you could argue that it passes through all of the points, too.

enter image description here

Mathematica code for drawing this picture:

ell[i_, x_] := (-1)^(i + 1) Sqrt[3/4 (1 - (x - (i + 1/2))^2)]
circ[i_, x_] := Sqrt[1/4 - (x - i)^2]
Plot[{-circ[1, x], ell[1, x], ell[2, x], ell[3, x], ell[4, x], circ[5, x]}, {x, 0, 6}, 
    PlotRange -> {-1.5, 1.5},  AspectRatio -> 1/2]
$\endgroup$
4
  • $\begingroup$ Very nice, this is the culmination of the line of thought outlined in the comments above and gives, from an "engineering" point of view, a satisfactory answer to the question (also in higher dimensions, though you must be careful how to rotate about the x-axis when introducing new dimensions ;) ). $\endgroup$
    – 5th decile
    Mar 30, 2015 at 16:38
  • $\begingroup$ About the edge points: leave them out, right? (except where the semicircles intersect with the first and last ellipses) Then your shape qualifies as a differentiable submanifold of R^2 and all light rays are "good". In this sense your answer is really the resolution of my original problem in two dimensions. As far as I can see it is not yet a full solution for the problem in higher dimensions since rotating this solution over an "open" angle of 180° about the x-axis (repeatedly) will leave a small chink where a few light rays can escape through. $\endgroup$
    – 5th decile
    Mar 30, 2015 at 16:47
  • $\begingroup$ Also a suggestion for an edit for your post: the picture is nice but scaling the x and y-axis consistently may add a lot of value in this case. I'll consider accepting this as an answer soon. $\endgroup$
    – 5th decile
    Mar 30, 2015 at 16:51
  • $\begingroup$ It is difficult to have a multipurpose boundary, although I did construct examples of that. Part of the idea here was to make sure each part of the boundary is visible from at most two points at a time. If you shine light from $x_1$ at something directing light from $x_2$ to $x_3$, you typically need another curve to refocus that. $\endgroup$ Mar 30, 2015 at 19:30
2
$\begingroup$

This is not an answer, but suggests one avenue to explore.

There are "$n$-foci ellipses," but I am not familiar with their reflection properties. This image is suggestive (but certainly not definitive):


TriEllipse
(Image from Mohd. Javed Khilji, "Multi Foci Closed Curves." (PDF download link).)
Another reference to these ellipses may be found at this MSE question.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.