The "Dzhanibekov effect" - an exercise in mechanics or fiction? Explain mathematically a video from a space station - MathOverflow

The "Dzhanibekov effect" - an exercise in mechanics or fiction? Explain mathematically a video from a space station

2011-11-26T20:04:30Z

The question briefly:

Can one explain the "Dzhanibekov effect" (see youtube videos from space station or comments below) on the basis of the standard rigid body dynamics using Euler's equations? (Or explain that this is impossible and that would be yet another focus ... )

Here are more details.

See these curious videos from a space station:

http://www.youtube.com/watch?v=L2o9eBl_Gzw

Or in the original form which is more striking (~30 seconds after the start): http://www.youtube.com/watch?v=dL6Pt1O_gSE

A mathematical description of the model is the standard rigid body motion in empty space (since we are in outer space), which (as is well-known) can be decomposed into a center of mass motion and a rotation part described by Euler's equations. (Euler's equations can be seen as a geodesic flow for some left-invariant metric on SO(3) - as V.I. Arnold taught.) Let us forget about the center of mass motion.

The phenomena shown in the videos is the following - a rigid body is rotating around the axis and then SUDDENLY the rotation axis CHANGES ITS POSITION by 180 degrees. And this happens periodically with some time period.

I am a little puzzled how to explain this.

If we admit that the motion of this rigid body is EXACTLY the rotation around the axis this is for sure IMPOSSIBLE - Euler's equations predict that such a motion will continue forever. However in the real world there is nothing exact so it might be related to some instability effect - that we are around an unstable equilibrium - and go away from it after some time...

Can it be so?

If it so, it is however not clear why it happens so quickly and we get exactly the rotation axis changing its position by 180 degrees...

Vladimir Dzhanibekov who observed this in 1985 is a famous Russian cosmonaut http://en.wikipedia.org/wiki/Vladimir_Dzhanibekov He was in space 5 times (as far as I know he is the champion in this). In 1985 his "mission impossible" was saving the Soviet space station "Salut-7" which due to some problems had run out of control...

If this can be explained I think it can be a beautiful illustration for students in lectures on rigid body mechanics... Also if one would want to add some humor in such a lecture one may add that our Earth is this kind of finger nut so it might also do such things ... (Maybe it really can?)

Answer by Victor Dods for The "Dzhanibekov effect" - an exercise in mechanics or fiction? Explain mathematically a video from a space station

2011-11-26T22:31:57Z

Take a look at "Rigid Body Stability Theorem" in chapter 15 of Marsden and Ratiu's "Introduction to Mechanics and Symmetry", which basically states that in situations like the one in the video (where, judging by the shape of the rotating object, the principal moments of inertia are mutually distinct), rotation about the middle principal axis is unstable. While the angular momentum of the rigid body is constant in its spatial representation, it is nonconstant with respect to the body's frame. There is a figure following the aforementioned theorem which shows the flow lines for the angular momentum with respect to the body's frame. There are three pairs of antipodal fixed points corresponding to rotation exactly about the principal axes. The "long" and "short" axes' critical points are stable (in the sense of Liapunov), while the "middle" critical points are saddle points, and therefore unstable. Furthermore, there are flow lines coming arbitrarily close to both of the antipodal "middle" critical points. I believe the solutions associated with these flow lines are what you seek.

Answer by Marcos Cossarini for The "Dzhanibekov effect" - an exercise in mechanics or fiction? Explain mathematically a video from a space station

2011-11-27T05:23:07Z

I started adding comments to Victor's answer, but they finally outgrew to this:

From an elementary point of view, the energy is conserved, and also the angular momentum vector $L$ (measured with respect to an inertial frame).

From a Lagrangian-mechanics-on-manifolds point of view, we have to solve a problem of movement in $SO_3$, that can be parametrized using Euler angles. Since there is only kinetic energy (no potential), it is equivalent to a problem of geodesic flow in a Riemannian manifold, and affine reparametrizations of solutions will again be solutions. This simply means that every solution can be sped up at wish.

Only the first angle in the composition will be a cyclic coordinate, but this is an artifact of the parametrization, since we see that there is $SO_3$ symmetry, i.e., the whole "position component" should be cyclic, and we would expect to reduce the second order o.d.e. on "position" to a (first order) problem on "speed".

(Is this intuition correct? Can it be done in other problems?)

To do this, we go to the frame of reference of the body. We try to find the motion of the angular speed vector $\omega$ with respect to it . This is a first order three dimensional problem, governed by the Euler equations $I_1\dot\omega_1=(I_2-I_3)\omega_2\omega_3$ (1)

$I_2\dot\omega_2=(I_3-I_1)\omega_3\omega_1$ (2)

$I_3\dot\omega_3=(I_1-I_2)\omega_1\omega_2$ (3),

which are expressed in principal axes coordinates.

(I understand this way of changing reference frames as an abuse of notation: the two reference frames $body$ and $space$ are different (Euclidean) spaces (even before coordinatizing them), and they are related by an isometry $body\to space$ (the attitude of the body) that changes with time (according to a function that we are trying to find). So every vector is two vectors: we actually have two angular speed vectors $\omega_{space}$ and $\omega_{body}$. This is relevant when we derivate them with respect to time. For example, $L_{space}$ is constant but $L_{body}$ isn't. This idea is simply a coordinate-free formalization of the notion of measuring speed "with respect to a reference frame".)

We can also express the problem in terms of the angular moment vector $L$, which is linearly equivalent to $\omega$ via the equation $L=I\omega$. I will switch between both versions when convenient.

Using the conservation of energy $2E=\langle\omega,I\omega\rangle$, we see the movement is constrained to an ellipsoid. So we have a two dimensional first order problem. You can search "Poinsot ellipsoid" in Google Images to see it with the flow lines drawn on it. The only equilibrium points are (from looking at the Euler equations) at the principal axes of the ellipsoid, which are the lines along which uniform rotation is possible.

Assuming $I_1>I_2>I_3$ we find only six equilibrium points, for example: $(\sqrt{2E/I_1},0,0)$. Near it we can express $\omega_1=\sqrt{(2E-I_2\omega_2^2-I_3\omega_3^2)/I_1}$ and write the second and third Euler equations for $\omega_2$ and $\omega_3$. Linearizing at $(0,0)$ we get

$I_2\dot\omega_2=(I_3-I_1)\sqrt{2E/I_1}\omega_3$ (2')

$I_3\dot\omega_3=(I_1-I_2)\sqrt{2E/I_1}\omega_2$ (3')

and since $I_3-I_1<0$ and $I_1-I_2>0$, we get imaginary eigenvalues, which means the equilibrium point is possibly neutrally stable. We confirm that the trajectories around it are closed by observing the reflection symmetry $(\omega_2,\omega_3)\to(-\omega_2,\omega_3)$. This happens at the equilibriums associated to the smallest moment of inertia $I_3$. At $(0,\sqrt{2E/I_2},0,0)$ we have two real opposite eigenvalues, which means the equilibrium point is unstable. We can determine the topology of the flow lines completely by analyzing the signs in the Euler equation in each octant, but it is easier to use another constant of movement.

The length of $L$ is constant, so the trajectory will be the intersection of the Poinsot ellipsoid with a sphere (or with an ellipsoid having the same principal axes, to phrase everything in terms of $\omega$ instead of $L$, but what follows is most clearly seen in the $L$ picture).

If the sphere is smallest, we get a pair of opposite points on the first axis.

If the sphere is small, we get a pair of closed curves around the first axis.

If the sphere is large, we get a pair of closed curves around the third axis.

If the sphere is largest, we get a pair of points on the third axis.

The middle case, corresponding to a medium sphere, contains the equilibrium points of the second axis (lets call them $A$ and $B$), joined by four curves (lets call them special). Each special curve is topologically equivalent to an open interval, and travel along it requires infinite time (since from unicity of solutions, we can't expect to reach an equilibrium point in finite time).

If we attempt to make a body rotate along an unstable axis in practice, we will miss, and obtain a closed curve around the first or third axis that will pass periodically near $A$ and $B$. Since motion near an equilibrium point is slow, the curve will spend most time near them, and will be similar to a pair of special curves. If we speed this up by giving a high initial energy, we get this periodic, almost instantaneous switch from $A$ to $B$.

With respect to an inertial frame, since $L_{space}$ is constant, we see that the body always rotates in the same direction, switching its position to the opposite after a period $T$. The movement is quasi-periodic: after time $T$, the movement restarts but with a possible angular shift around the $L_{space}$ axis (whose magnitude is always the same for a certain trajectory and can't be calculated easily (as far as I know)).

Answer by David Speyer for The "Dzhanibekov effect" - an exercise in mechanics or fiction? Explain mathematically a video from a space station

2011-11-27T13:43:52Z

In English-speaking physics classes, this is usually called the "Tennis Racket Theorem", because a tennis racket is a good example of a physical object with three widely separated moments of inertia. If you look in this video, you can see the 180 degree flip you describe taking place here on Earth. The interesting difference between Earth and space is that, on Earth, it is difficult to watch an object in free-fall for more than a second, so you only see a fraction of the orbits described in Marcos and Victor's answers; the video I link to looks like about half an orbit. In space, you can see the cycle happen several times.

There are tons of proofs of the tennis racket theorem online, here is one.

This question was also asked on physics.SE; the answer there linked to this nice paper.

Answer by Terry Tao for The "Dzhanibekov effect" - an exercise in mechanics or fiction? Explain mathematically a video from a space station

2011-11-27T18:51:18Z

One can see this effect qualitatively from Newtonian first principles (as opposed to Hamiltonian or Lagrangian principles) by looking at a degenerate case, when one moment of inertia is very small and the other two are very close to each other.

More specifically, consider a thin rigid unit disk, initially oriented in the xy plane and centred at the origin (0,0,0). We make the "spherical cow" hypotheses that this disk has infinitesimal thickness and mass, but infinite rigidity. On this disk, we place heavy point masses of equal mass M at the points (1,0,0) and (-1,0,0), and light point masses of equal mass m at the points (0,1,0) and (0,-1,0). Here $0 < m \ll M$, i.e. m should be viewed as negligible with respect to M. (The moments of inertia are then $2m, 2M, 2(m+M)$, though we will not explicitly use these moments in the analysis below.)

We now set up the unstable equilibrium by rotating the disk around the y axis. Thus, the light m-masses stay fixed, while the heavy M-masses rotate in the xz plane. This is in equilibrium: there are no net forces on the m-masses, while the rigid disk exerts a centripetal force on the M-masses that keeps them moving in a circular motion on the xz plane.

We can view this equilibrium in rotating coordinates, matching the motion of the M-masses. (Imagine a camera viewing the disk, rotating around the y-axis at exactly the same rate as the disk is rotating.) In this rotating frame, the disk is now stationary (so the m-masses are stuck at $(0,\pm 1,0)$ and the M-masses are stuck at $(\pm 1,0,0)$), but there is a centrifugal force exerted on all bodies proportional to the distance to the y-axis. The m-masses are on the y-axis and thus experience no centrifugal force; but the M-masses are away from the y-axis and thus experience a centrifugal force, which is then balanced out by the centripetal forces of the rigid disk.

Now let us perturb the disk a bit, so that the m-masses and M-masses are knocked a little bit out of position (but keeping the centre of mass fixed at (0,0,0)). In particular, the m-masses are knocked away from the y-axis and now experience a little bit of centrifugal force. On the other hand, the rigid disk forces the light m-masses to remain orthogonal to the heavy M-masses, by exerting tension forces between the masses. In the regime where m is negligible compared to M, these tension forces will barely budge the heavy M masses (which therefore remain essentially fixed at $(\pm 1,0,0)$ in the rotating frame), so the effect of these tension forces is to constrain the m-masses to lie in the yz plane (up to negligible errors which we now ignore). Rigidity also keeps the m-masses at a unit distance from the origin, and antipodal to each other, so the m-masses are now constrained to be antipodal points on the unit circle in the yz plane. However, other than this, rigidity imposes no further constraints on the location of the m-masses, which can then move freely as antipodal points in this unit circle.

The effect of centrifugal force in the rotating frame is now clear: if an m-mass (and its antipode) is perturbed to be a little bit off the y-axis in this unit circle with no initial velocity, then centrifugal force will nudge it a little further off the y-axis, slowly at first but with inexorable acceleration. Eventually it will shoot across the unit circle and then approach the antipode of its previous position. At this point the centrifugal forces act to slow the m-masses down, reversing all the previous acceleration, until one ends up with no velocity at a small distance from the antipode. The process then repeats itself (imagine a marble rolling frictionlessly between two equally tall hills, starting from a position very close to the peak of one of the hills).

Answer by A Alalalas for The "Dzhanibekov effect" - an exercise in mechanics or fiction? Explain mathematically a video from a space station

2012-04-07T08:30:12Z

The bloody thing is not "in space"; it is in a contained atmosphere with turbulence and resistance all around it. An inertial imbalance will take on rotational properties and shift the angular momentum.